Skip to main content

Extrinsics

The following sections contain Extrinsics methods are part of the default Kusama runtime. On the api, these are exposed via api.tx.<module>.<method>.

(NOTE: These were generated from a static/snapshot view of a recent default Kusama runtime. Some items may not be available in older nodes, or in any customized implementations.)

assetRate​

create(asset_kind: PolkadotRuntimeCommonImplsVersionedLocatableAsset, rate: u128)​

  • interface: api.tx.assetRate.create

  • summary: Initialize a conversion rate to native balance for the given asset.

    Complexity​

    • O(1)

remove(asset_kind: PolkadotRuntimeCommonImplsVersionedLocatableAsset)​

  • interface: api.tx.assetRate.remove

  • summary: Remove an existing conversion rate to native balance for the given asset.

    Complexity​

    • O(1)

update(asset_kind: PolkadotRuntimeCommonImplsVersionedLocatableAsset, rate: u128)​

  • interface: api.tx.assetRate.update

  • summary: Update the conversion rate to native balance for the given asset.

    Complexity​

    • O(1)

auctions​

bid(para: Compact<u32>, auction_index: Compact<u32>, first_slot: Compact<u32>, last_slot: Compact<u32>, amount: Compact<u128>)​

  • interface: api.tx.auctions.bid

  • summary: Make a new bid from an account (including a parachain account) for deploying a new parachain.

    Multiple simultaneous bids from the same bidder are allowed only as long as all active bids overlap each other (i.e. are mutually exclusive). Bids cannot be redacted.

    • sub is the sub-bidder ID, allowing for multiple competing bids to be made by (and funded by) the same account.

    • auction_index is the index of the auction to bid on. Should just be the present value of AuctionCounter.

    • first_slot is the first lease period index of the range to bid on. This is the absolute lease period index value, not an auction-specific offset.

    • last_slot is the last lease period index of the range to bid on. This is the absolute lease period index value, not an auction-specific offset.

    • amount is the amount to bid to be held as deposit for the parachain should the bid win. This amount is held throughout the range.

cancelAuction()​

  • interface: api.tx.auctions.cancelAuction

  • summary: Cancel an in-progress auction.

    Can only be called by Root origin.

newAuction(duration: Compact<u32>, lease_period_index: Compact<u32>)​

  • interface: api.tx.auctions.newAuction

  • summary: Create a new auction.

    This can only happen when there isn't already an auction in progress and may only be called by the root origin. Accepts the duration of this auction and the lease_period_index of the initial lease period of the four that are to be auctioned.

babe​

planConfigChange(config: SpConsensusBabeDigestsNextConfigDescriptor)​

  • interface: api.tx.babe.planConfigChange
  • summary: Plan an epoch config change. The epoch config change is recorded and will be enacted on the next call to enact_epoch_change. The config will be activated one epoch after. Multiple calls to this method will replace any existing planned config change that had not been enacted yet.

reportEquivocation(equivocation_proof: SpConsensusSlotsEquivocationProof, key_owner_proof: SpSessionMembershipProof)​

  • interface: api.tx.babe.reportEquivocation
  • summary: Report authority equivocation/misbehavior. This method will verify the equivocation proof and validate the given key ownership proof against the extracted offender. If both are valid, the offence will be reported.

reportEquivocationUnsigned(equivocation_proof: SpConsensusSlotsEquivocationProof, key_owner_proof: SpSessionMembershipProof)​

  • interface: api.tx.babe.reportEquivocationUnsigned
  • summary: Report authority equivocation/misbehavior. This method will verify the equivocation proof and validate the given key ownership proof against the extracted offender. If both are valid, the offence will be reported. This extrinsic must be called unsigned and it is expected that only block authors will call it (validated in ValidateUnsigned), as such if the block author is defined it will be defined as the equivocation reporter.

balances​

burn(value: Compact<u128>, keep_alive: bool)​

  • interface: api.tx.balances.burn

  • summary: Burn the specified liquid free balance from the origin account.

    If the origin's account ends up below the existential deposit as a result of the burn and keep_alive is false, the account will be reaped.

    Unlike sending funds to a burn address, which merely makes the funds inaccessible, this burn operation will reduce total issuance by the amount burned.

forceAdjustTotalIssuance(direction: PalletBalancesAdjustmentDirection, delta: Compact<u128>)​

  • interface: api.tx.balances.forceAdjustTotalIssuance

  • summary: Adjust the total issuance in a saturating way.

    Can only be called by root and always needs a positive delta.

    Example​

forceSetBalance(who: MultiAddress, new_free: Compact<u128>)​

  • interface: api.tx.balances.forceSetBalance

  • summary: Set the regular balance of a given account.

    The dispatch origin for this call is root.

forceTransfer(source: MultiAddress, dest: MultiAddress, value: Compact<u128>)​

  • interface: api.tx.balances.forceTransfer
  • summary: Exactly as transfer_allow_death, except the origin must be root and the source account may be specified.

forceUnreserve(who: MultiAddress, amount: u128)​

  • interface: api.tx.balances.forceUnreserve

  • summary: Unreserve some balance from a user by force.

    Can only be called by ROOT.

transferAll(dest: MultiAddress, keep_alive: bool)​

  • interface: api.tx.balances.transferAll

  • summary: Transfer the entire transferable balance from the caller account.

    NOTE: This function only attempts to transfer transferable balances. This means that any locked, reserved, or existential deposits (when keep_alive is true), will not be transferred by this function. To ensure that this function results in a killed account, you might need to prepare the account by removing any reference counters, storage deposits, etc...

    The dispatch origin of this call must be Signed.

    • dest: The recipient of the transfer.

    • keep_alive: A boolean to determine if the transfer_all operation should send all of the funds the account has, causing the sender account to be killed (false), or transfer everything except at least the existential deposit, which will guarantee to keep the sender account alive (true).

transferAllowDeath(dest: MultiAddress, value: Compact<u128>)​

  • interface: api.tx.balances.transferAllowDeath

  • summary: Transfer some liquid free balance to another account.

    transfer_allow_death will set the FreeBalance of the sender and receiver. If the sender's account is below the existential deposit as a result of the transfer, the account will be reaped.

    The dispatch origin for this call must be Signed by the transactor.

transferKeepAlive(dest: MultiAddress, value: Compact<u128>)​

  • interface: api.tx.balances.transferKeepAlive

  • summary: Same as the transfer_allow_death call, but with a check that the transfer will not kill the origin account.

    99% of the time you want transfer_allow_death instead.

upgradeAccounts(who: Vec<AccountId32>)​

  • interface: api.tx.balances.upgradeAccounts

  • summary: Upgrade a specified account.

    • origin: Must be Signed.

    • who: The account to be upgraded.

      This will waive the transaction fee if at least all but 10% of the accounts needed to be upgraded. (We let some not have to be upgraded just in order to allow for the possibility of churn).

beefy​

reportEquivocation(equivocation_proof: SpConsensusBeefyDoubleVotingProof, key_owner_proof: SpSessionMembershipProof)​

  • interface: api.tx.beefy.reportEquivocation
  • summary: Report voter equivocation/misbehavior. This method will verify the equivocation proof and validate the given key ownership proof against the extracted offender. If both are valid, the offence will be reported.

reportEquivocationUnsigned(equivocation_proof: SpConsensusBeefyDoubleVotingProof, key_owner_proof: SpSessionMembershipProof)​

  • interface: api.tx.beefy.reportEquivocationUnsigned

  • summary: Report voter equivocation/misbehavior. This method will verify the equivocation proof and validate the given key ownership proof against the extracted offender. If both are valid, the offence will be reported.

    This extrinsic must be called unsigned and it is expected that only block authors will call it (validated in ValidateUnsigned), as such if the block author is defined it will be defined as the equivocation reporter.

setNewGenesis(delay_in_blocks: u32)​

  • interface: api.tx.beefy.setNewGenesis

  • summary: Reset BEEFY consensus by setting a new BEEFY genesis at delay_in_blocks blocks in the future.

    Note: delay_in_blocks has to be at least 1.

bounties​

acceptCurator(bounty_id: Compact<u32>)​

  • interface: api.tx.bounties.acceptCurator

  • summary: Accept the curator role for a bounty. A deposit will be reserved from curator and refund upon successful payout.

    May only be called from the curator.

    Complexity​

    • O(1).

approveBounty(bounty_id: Compact<u32>)​

  • interface: api.tx.bounties.approveBounty

  • summary: Approve a bounty proposal. At a later time, the bounty will be funded and become active and the original deposit will be returned.

    May only be called from T::SpendOrigin.

    Complexity​

    • O(1).

awardBounty(bounty_id: Compact<u32>, beneficiary: MultiAddress)​

  • interface: api.tx.bounties.awardBounty

  • summary: Award bounty to a beneficiary account. The beneficiary will be able to claim the funds after a delay.

    The dispatch origin for this call must be the curator of this bounty.

    • bounty_id: Bounty ID to award.

    • beneficiary: The beneficiary account whom will receive the payout.

      Complexity​

    • O(1).

claimBounty(bounty_id: Compact<u32>)​

  • interface: api.tx.bounties.claimBounty

  • summary: Claim the payout from an awarded bounty after payout delay.

    The dispatch origin for this call must be the beneficiary of this bounty.

    • bounty_id: Bounty ID to claim.

      Complexity​

    • O(1).

closeBounty(bounty_id: Compact<u32>)​

  • interface: api.tx.bounties.closeBounty

  • summary: Cancel a proposed or active bounty. All the funds will be sent to treasury and the curator deposit will be unreserved if possible.

    Only T::RejectOrigin is able to cancel a bounty.

    • bounty_id: Bounty ID to cancel.

      Complexity​

    • O(1).

extendBountyExpiry(bounty_id: Compact<u32>, remark: Bytes)​

  • interface: api.tx.bounties.extendBountyExpiry

  • summary: Extend the expiry time of an active bounty.

    The dispatch origin for this call must be the curator of this bounty.

    • bounty_id: Bounty ID to extend.

    • remark: additional information.

      Complexity​

    • O(1).

proposeBounty(value: Compact<u128>, description: Bytes)​

  • interface: api.tx.bounties.proposeBounty

  • summary: Propose a new bounty.

    The dispatch origin for this call must be Signed.

    Payment: TipReportDepositBase will be reserved from the origin account, as well as DataDepositPerByte for each byte in reason. It will be unreserved upon approval, or slashed when rejected.

    • curator: The curator account whom will manage this bounty.

    • fee: The curator fee.

    • value: The total payment amount of this bounty, curator fee included.

    • description: The description of this bounty.

proposeCurator(bounty_id: Compact<u32>, curator: MultiAddress, fee: Compact<u128>)​

  • interface: api.tx.bounties.proposeCurator

  • summary: Propose a curator to a funded bounty.

    May only be called from T::SpendOrigin.

    Complexity​

    • O(1).

unassignCurator(bounty_id: Compact<u32>)​

  • interface: api.tx.bounties.unassignCurator

  • summary: Unassign curator from a bounty.

    This function can only be called by the RejectOrigin a signed origin.

    If this function is called by the RejectOrigin, we assume that the curator is malicious or inactive. As a result, we will slash the curator when possible.

    If the origin is the curator, we take this as a sign they are unable to do their job and they willingly give up. We could slash them, but for now we allow them to recover their deposit and exit without issue. (We may want to change this if it is abused.)

    Finally, the origin can be anyone if and only if the curator is "inactive". This allows anyone in the community to call out that a curator is not doing their due diligence, and we should pick a new curator. In this case the curator should also be slashed.

    Complexity​

    • O(1).

childBounties​

acceptCurator(parent_bounty_id: Compact<u32>, child_bounty_id: Compact<u32>)​

  • interface: api.tx.childBounties.acceptCurator

  • summary: Accept the curator role for the child-bounty.

    The dispatch origin for this call must be the curator of this child-bounty.

    A deposit will be reserved from the curator and refund upon successful payout or cancellation.

    Fee for curator is deducted from curator fee of parent bounty.

    Parent bounty must be in active state, for this child-bounty call to work.

    Child-bounty must be in "CuratorProposed" state, for processing the call. And state of child-bounty is moved to "Active" on successful call completion.

    • parent_bounty_id: Index of parent bounty.

    • child_bounty_id: Index of child bounty.

addChildBounty(parent_bounty_id: Compact<u32>, value: Compact<u128>, description: Bytes)​

  • interface: api.tx.childBounties.addChildBounty

  • summary: Add a new child-bounty.

    The dispatch origin for this call must be the curator of parent bounty and the parent bounty must be in "active" state.

    Child-bounty gets added successfully & fund gets transferred from parent bounty to child-bounty account, if parent bounty has enough funds, else the call fails.

    Upper bound to maximum number of active child bounties that can be added are managed via runtime trait config [Config::MaxActiveChildBountyCount].

    If the call is success, the status of child-bounty is updated to "Added".

    • parent_bounty_id: Index of parent bounty for which child-bounty is being added.

    • value: Value for executing the proposal.

    • description: Text description for the child-bounty.

awardChildBounty(parent_bounty_id: Compact<u32>, child_bounty_id: Compact<u32>, beneficiary: MultiAddress)​

  • interface: api.tx.childBounties.awardChildBounty

  • summary: Award child-bounty to a beneficiary.

    The beneficiary will be able to claim the funds after a delay.

    The dispatch origin for this call must be the parent curator or curator of this child-bounty.

    Parent bounty must be in active state, for this child-bounty call to work.

    Child-bounty must be in active state, for processing the call. And state of child-bounty is moved to "PendingPayout" on successful call completion.

    • parent_bounty_id: Index of parent bounty.

    • child_bounty_id: Index of child bounty.

    • beneficiary: Beneficiary account.

claimChildBounty(parent_bounty_id: Compact<u32>, child_bounty_id: Compact<u32>)​

  • interface: api.tx.childBounties.claimChildBounty

  • summary: Claim the payout from an awarded child-bounty after payout delay.

    The dispatch origin for this call may be any signed origin.

    Call works independent of parent bounty state, No need for parent bounty to be in active state.

    The Beneficiary is paid out with agreed bounty value. Curator fee is paid & curator deposit is unreserved.

    Child-bounty must be in "PendingPayout" state, for processing the call. And instance of child-bounty is removed from the state on successful call completion.

    • parent_bounty_id: Index of parent bounty.

    • child_bounty_id: Index of child bounty.

closeChildBounty(parent_bounty_id: Compact<u32>, child_bounty_id: Compact<u32>)​

  • interface: api.tx.childBounties.closeChildBounty

  • summary: Cancel a proposed or active child-bounty. Child-bounty account funds are transferred to parent bounty account. The child-bounty curator deposit may be unreserved if possible.

    The dispatch origin for this call must be either parent curator or T::RejectOrigin.

    If the state of child-bounty is Active, curator deposit is unreserved.

    If the state of child-bounty is PendingPayout, call fails & returns PendingPayout error.

    For the origin other than T::RejectOrigin, parent bounty must be in active state, for this child-bounty call to work. For origin T::RejectOrigin execution is forced.

    Instance of child-bounty is removed from the state on successful call completion.

    • parent_bounty_id: Index of parent bounty.

    • child_bounty_id: Index of child bounty.

proposeCurator(parent_bounty_id: Compact<u32>, child_bounty_id: Compact<u32>, curator: MultiAddress, fee: Compact<u128>)​

  • interface: api.tx.childBounties.proposeCurator

  • summary: Propose curator for funded child-bounty.

    The dispatch origin for this call must be curator of parent bounty.

    Parent bounty must be in active state, for this child-bounty call to work.

    Child-bounty must be in "Added" state, for processing the call. And state of child-bounty is moved to "CuratorProposed" on successful call completion.

    • parent_bounty_id: Index of parent bounty.

    • child_bounty_id: Index of child bounty.

    • curator: Address of child-bounty curator.

    • fee: payment fee to child-bounty curator for execution.

unassignCurator(parent_bounty_id: Compact<u32>, child_bounty_id: Compact<u32>)​

  • interface: api.tx.childBounties.unassignCurator

  • summary: Unassign curator from a child-bounty.

    The dispatch origin for this call can be either RejectOrigin, or the curator of the parent bounty, or any signed origin.

    For the origin other than T::RejectOrigin and the child-bounty curator, parent bounty must be in active state, for this call to work. We allow child-bounty curator and T::RejectOrigin to execute this call irrespective of the parent bounty state.

    If this function is called by the RejectOrigin or the parent bounty curator, we assume that the child-bounty curator is malicious or inactive. As a result, child-bounty curator deposit is slashed.

    If the origin is the child-bounty curator, we take this as a sign that they are unable to do their job, and are willingly giving up. We could slash the deposit, but for now we allow them to unreserve their deposit and exit without issue. (We may want to change this if it is abused.)

    Finally, the origin can be anyone iff the child-bounty curator is "inactive". Expiry update due of parent bounty is used to estimate inactive state of child-bounty curator.

    This allows anyone in the community to call out that a child-bounty curator is not doing their due diligence, and we should pick a new one. In this case the child-bounty curator deposit is slashed.

    State of child-bounty is moved to Added state on successful call completion.

    • parent_bounty_id: Index of parent bounty.

    • child_bounty_id: Index of child bounty.

claims​

attest(statement: Bytes)​

  • interface: api.tx.claims.attest

  • summary: Attest to a statement, needed to finalize the claims process.

    WARNING: Insecure unless your chain includes PrevalidateAttests as a SignedExtension.

    Unsigned Validation: A call to attest is deemed valid if the sender has a Preclaim registered and provides a statement which is expected for the account.

    Parameters:

    • statement: The identity of the statement which is being attested to in the signature.

claim(dest: AccountId32, ethereum_signature: PolkadotRuntimeCommonClaimsEcdsaSignature)​

  • interface: api.tx.claims.claim

  • summary: Make a claim to collect your DOTs.

    The dispatch origin for this call must be None.

    Unsigned Validation: A call to claim is deemed valid if the signature provided matches the expected signed message of:

    Ethereum Signed Message: > (configured prefix string)(address)

    and address matches the dest account.

    Parameters:

    • dest: The destination account to payout the claim.

    • ethereum_signature: The signature of an ethereum signed message matching the format described above.

claimAttest(dest: AccountId32, ethereum_signature: PolkadotRuntimeCommonClaimsEcdsaSignature, statement: Bytes)​

  • interface: api.tx.claims.claimAttest

  • summary: Make a claim to collect your DOTs by signing a statement.

    The dispatch origin for this call must be None.

    Unsigned Validation: A call to claim_attest is deemed valid if the signature provided matches the expected signed message of:

    Ethereum Signed Message: > (configured prefix string)(address)(statement)

    and address matches the dest account; the statement must match that which is expected according to your purchase arrangement.

    Parameters:

    • dest: The destination account to payout the claim.

    • ethereum_signature: The signature of an ethereum signed message matching the format described above.

    • statement: The identity of the statement which is being attested to in the signature.

mintClaim(who: EthereumAddress, value: u128, vesting_schedule: Option<(u128,u128,u32)>, statement: Option<PolkadotRuntimeCommonClaimsStatementKind>)​

  • interface: api.tx.claims.mintClaim

  • summary: Mint a new claim to collect DOTs.

    The dispatch origin for this call must be Root.

    Parameters:

    • who: The Ethereum address allowed to collect this claim.

    • value: The number of DOTs that will be claimed.

    • vesting_schedule: An optional vesting schedule for these DOTs.

moveClaim(old: EthereumAddress, new: EthereumAddress, maybe_preclaim: Option<AccountId32>)​

  • interface: api.tx.claims.moveClaim

configuration​

setApprovalVotingParams(new: PolkadotPrimitivesV7ApprovalVotingParams)​

  • interface: api.tx.configuration.setApprovalVotingParams
  • summary: Set approval-voting-params.

setAsyncBackingParams(new: PolkadotPrimitivesV7AsyncBackingAsyncBackingParams)​

  • interface: api.tx.configuration.setAsyncBackingParams
  • summary: Set the asynchronous backing parameters.

setBypassConsistencyCheck(new: bool)​

  • interface: api.tx.configuration.setBypassConsistencyCheck
  • summary: Setting this to true will disable consistency checks for the configuration setters. Use with caution.

setCodeRetentionPeriod(new: u32)​

  • interface: api.tx.configuration.setCodeRetentionPeriod
  • summary: Set the acceptance period for an included candidate.

setCoretimeCores(new: u32)​

  • interface: api.tx.configuration.setCoretimeCores

  • summary: Set the number of coretime execution cores.

    NOTE: that this configuration is managed by the coretime chain. Only manually change this, if you really know what you are doing!

setDisputePeriod(new: u32)​

  • interface: api.tx.configuration.setDisputePeriod
  • summary: Set the dispute period, in number of sessions to keep for disputes.

setDisputePostConclusionAcceptancePeriod(new: u32)​

  • interface: api.tx.configuration.setDisputePostConclusionAcceptancePeriod
  • summary: Set the dispute post conclusion acceptance period.

setExecutorParams(new: PolkadotPrimitivesV7ExecutorParams)​

  • interface: api.tx.configuration.setExecutorParams
  • summary: Set PVF executor parameters.

setGroupRotationFrequency(new: u32)​

  • interface: api.tx.configuration.setGroupRotationFrequency
  • summary: Set the parachain validator-group rotation frequency

setHrmpChannelMaxCapacity(new: u32)​

  • interface: api.tx.configuration.setHrmpChannelMaxCapacity
  • summary: Sets the maximum number of messages allowed in an HRMP channel at once.

setHrmpChannelMaxMessageSize(new: u32)​

  • interface: api.tx.configuration.setHrmpChannelMaxMessageSize
  • summary: Sets the maximum size of a message that could ever be put into an HRMP channel.

setHrmpChannelMaxTotalSize(new: u32)​

  • interface: api.tx.configuration.setHrmpChannelMaxTotalSize
  • summary: Sets the maximum total size of messages in bytes allowed in an HRMP channel at once.

setHrmpMaxMessageNumPerCandidate(new: u32)​

  • interface: api.tx.configuration.setHrmpMaxMessageNumPerCandidate
  • summary: Sets the maximum number of outbound HRMP messages can be sent by a candidate.

setHrmpMaxParachainInboundChannels(new: u32)​

  • interface: api.tx.configuration.setHrmpMaxParachainInboundChannels
  • summary: Sets the maximum number of inbound HRMP channels a parachain is allowed to accept.

setHrmpMaxParachainOutboundChannels(new: u32)​

  • interface: api.tx.configuration.setHrmpMaxParachainOutboundChannels
  • summary: Sets the maximum number of outbound HRMP channels a parachain is allowed to open.

setHrmpOpenRequestTtl(new: u32)​

  • interface: api.tx.configuration.setHrmpOpenRequestTtl
  • summary: Sets the number of sessions after which an HRMP open channel request expires.

setHrmpRecipientDeposit(new: u128)​

  • interface: api.tx.configuration.setHrmpRecipientDeposit
  • summary: Sets the amount of funds that the recipient should provide for accepting opening an HRMP channel.

setHrmpSenderDeposit(new: u128)​

  • interface: api.tx.configuration.setHrmpSenderDeposit
  • summary: Sets the amount of funds that the sender should provide for opening an HRMP channel.

setMaxAvailabilityTimeouts(new: u32)​

  • interface: api.tx.configuration.setMaxAvailabilityTimeouts
  • summary: Set the max number of times a claim may timeout on a core before it is abandoned

setMaxCodeSize(new: u32)​

  • interface: api.tx.configuration.setMaxCodeSize
  • summary: Set the max validation code size for incoming upgrades.

setMaxDownwardMessageSize(new: u32)​

  • interface: api.tx.configuration.setMaxDownwardMessageSize
  • summary: Set the critical downward message size.

setMaxHeadDataSize(new: u32)​

  • interface: api.tx.configuration.setMaxHeadDataSize
  • summary: Set the max head data size for paras.

setMaxPovSize(new: u32)​

  • interface: api.tx.configuration.setMaxPovSize
  • summary: Set the max POV block size for incoming upgrades.

setMaxUpwardMessageNumPerCandidate(new: u32)​

  • interface: api.tx.configuration.setMaxUpwardMessageNumPerCandidate
  • summary: Sets the maximum number of messages that a candidate can contain.

setMaxUpwardMessageSize(new: u32)​

  • interface: api.tx.configuration.setMaxUpwardMessageSize
  • summary: Sets the maximum size of an upward message that can be sent by a candidate.

setMaxUpwardQueueCount(new: u32)​

  • interface: api.tx.configuration.setMaxUpwardQueueCount
  • summary: Sets the maximum items that can present in a upward dispatch queue at once.

setMaxUpwardQueueSize(new: u32)​

  • interface: api.tx.configuration.setMaxUpwardQueueSize
  • summary: Sets the maximum total size of items that can present in a upward dispatch queue at once.

setMaxValidators(new: Option<u32>)​

  • interface: api.tx.configuration.setMaxValidators
  • summary: Set the maximum number of validators to use in parachain consensus.

setMaxValidatorsPerCore(new: Option<u32>)​

  • interface: api.tx.configuration.setMaxValidatorsPerCore
  • summary: Set the maximum number of validators to assign to any core.

setMinimumBackingVotes(new: u32)​

  • interface: api.tx.configuration.setMinimumBackingVotes
  • summary: Set the minimum backing votes threshold.

setMinimumValidationUpgradeDelay(new: u32)​

  • interface: api.tx.configuration.setMinimumValidationUpgradeDelay

  • summary: Sets the minimum delay between announcing the upgrade block for a parachain until the upgrade taking place.

    See the field documentation for information and constraints for the new value.

setNDelayTranches(new: u32)​

  • interface: api.tx.configuration.setNDelayTranches
  • summary: Set the total number of delay tranches.

setNeededApprovals(new: u32)​

  • interface: api.tx.configuration.setNeededApprovals
  • summary: Set the number of validators needed to approve a block.

setNoShowSlots(new: u32)​

  • interface: api.tx.configuration.setNoShowSlots
  • summary: Set the no show slots, in number of number of consensus slots. Must be at least 1.

setNodeFeature(index: u8, value: bool)​

  • interface: api.tx.configuration.setNodeFeature
  • summary: Set/Unset a node feature.

setOnDemandBaseFee(new: u128)​

  • interface: api.tx.configuration.setOnDemandBaseFee
  • summary: Set the on demand (parathreads) base fee.

setOnDemandFeeVariability(new: Perbill)​

  • interface: api.tx.configuration.setOnDemandFeeVariability
  • summary: Set the on demand (parathreads) fee variability.

setOnDemandQueueMaxSize(new: u32)​

  • interface: api.tx.configuration.setOnDemandQueueMaxSize
  • summary: Set the on demand (parathreads) queue max size.

setOnDemandTargetQueueUtilization(new: Perbill)​

  • interface: api.tx.configuration.setOnDemandTargetQueueUtilization
  • summary: Set the on demand (parathreads) fee variability.

setOnDemandTtl(new: u32)​

  • interface: api.tx.configuration.setOnDemandTtl
  • summary: Set the on demand (parathreads) ttl in the claimqueue.

setParasAvailabilityPeriod(new: u32)​

  • interface: api.tx.configuration.setParasAvailabilityPeriod
  • summary: Set the availability period for paras.

setPvfVotingTtl(new: u32)​

  • interface: api.tx.configuration.setPvfVotingTtl
  • summary: Set the number of session changes after which a PVF pre-checking voting is rejected.

setRelayVrfModuloSamples(new: u32)​

  • interface: api.tx.configuration.setRelayVrfModuloSamples
  • summary: Set the number of samples to do of the RelayVRFModulo approval assignment criterion.

setSchedulerParams(new: PolkadotPrimitivesVstagingSchedulerParams)​

  • interface: api.tx.configuration.setSchedulerParams
  • summary: Set scheduler-params.

setSchedulingLookahead(new: u32)​

  • interface: api.tx.configuration.setSchedulingLookahead
  • summary: Set the scheduling lookahead, in expected number of blocks at peak throughput.

setValidationUpgradeCooldown(new: u32)​

  • interface: api.tx.configuration.setValidationUpgradeCooldown
  • summary: Set the validation upgrade cooldown.

setValidationUpgradeDelay(new: u32)​

  • interface: api.tx.configuration.setValidationUpgradeDelay
  • summary: Set the validation upgrade delay.

setZerothDelayTrancheWidth(new: u32)​

  • interface: api.tx.configuration.setZerothDelayTrancheWidth
  • summary: Set the zeroth delay tranche width.

convictionVoting​

delegate(class: u16, to: MultiAddress, conviction: PalletConvictionVotingConviction, balance: u128)​

  • interface: api.tx.convictionVoting.delegate

  • summary: Delegate the voting power (with some given conviction) of the sending account for a particular class of polls.

    The balance delegated is locked for as long as it's delegated, and thereafter for the time appropriate for the conviction's lock period.

    The dispatch origin of this call must be Signed, and the signing account must either:

    • be delegating already; or

    • have no voting activity (if there is, then it will need to be removed through remove_vote).

    • to: The account whose voting the target account's voting power will follow.

    • class: The class of polls to delegate. To delegate multiple classes, multiple calls to this function are required.

    • conviction: The conviction that will be attached to the delegated votes. When the account is undelegated, the funds will be locked for the corresponding period.

    • balance: The amount of the account's balance to be used in delegating. This must not be more than the account's current balance.

      Emits Delegated.

      Weight: O(R) where R is the number of polls the voter delegating to has voted on. Weight is initially charged as if maximum votes, but is refunded later.

removeOtherVote(target: MultiAddress, class: u16, index: u32)​

  • interface: api.tx.convictionVoting.removeOtherVote

  • summary: Remove a vote for a poll.

    If the target is equal to the signer, then this function is exactly equivalent to remove_vote. If not equal to the signer, then the vote must have expired, either because the poll was cancelled, because the voter lost the poll or because the conviction period is over.

    The dispatch origin of this call must be Signed.

    • target: The account of the vote to be removed; this account must have voted for poll index.

    • index: The index of poll of the vote to be removed.

    • class: The class of the poll.

      Weight: O(R + log R) where R is the number of polls that target has voted on. Weight is calculated for the maximum number of vote.

removeVote(class: Option<u16>, index: u32)​

  • interface: api.tx.convictionVoting.removeVote

  • summary: Remove a vote for a poll.

    If:

    • the poll was cancelled, or

    • the poll is ongoing, or

    • the poll has ended such that

    • the vote of the account was in opposition to the result; or

    • there was no conviction to the account's vote; or

    • the account made a split vote ...then the vote is removed cleanly and a following call to unlock may result in more funds being available.

      If, however, the poll has ended and:

    • it finished corresponding to the vote of the account, and

    • the account made a standard vote with conviction, and

    • the lock period of the conviction is not over ...then the lock will be aggregated into the overall account's lock, which may involve

    overlocking (where the two locks are combined into a single lock that is the maximum of both the amount locked and the time is it locked for).

    The dispatch origin of this call must be Signed, and the signer must have a vote registered for poll index.

    • index: The index of poll of the vote to be removed.

    • class: Optional parameter, if given it indicates the class of the poll. For polls which have finished or are cancelled, this must be Some.

      Weight: O(R + log R) where R is the number of polls that target has voted on. Weight is calculated for the maximum number of vote.

undelegate(class: u16)​

  • interface: api.tx.convictionVoting.undelegate

  • summary: Undelegate the voting power of the sending account for a particular class of polls.

    Tokens may be unlocked following once an amount of time consistent with the lock period of the conviction with which the delegation was issued has passed.

    The dispatch origin of this call must be Signed and the signing account must be currently delegating.

    • class: The class of polls to remove the delegation from.

      Emits Undelegated.

      Weight: O(R) where R is the number of polls the voter delegating to has voted on. Weight is initially charged as if maximum votes, but is refunded later.

unlock(class: u16, target: MultiAddress)​

  • interface: api.tx.convictionVoting.unlock

  • summary: Remove the lock caused by prior voting/delegating which has expired within a particular class.

    The dispatch origin of this call must be Signed.

    • class: The class of polls to unlock.

    • target: The account to remove the lock on.

      Weight: O(R) with R number of vote of target.

vote(poll_index: Compact<u32>, vote: PalletConvictionVotingVoteAccountVote)​

  • interface: api.tx.convictionVoting.vote

  • summary: Vote in a poll. If vote.is_aye(), the vote is to enact the proposal; otherwise it is a vote to keep the status quo.

    The dispatch origin of this call must be Signed.

    • poll_index: The index of the poll to vote for.

    • vote: The vote configuration.

      Weight: O(R) where R is the number of polls the voter has voted on.

coretime​

assignCore(core: u16, begin: u32, assignment: Vec<(PalletBrokerCoretimeInterfaceCoreAssignment,u16)>, end_hint: Option<u32>)​

  • interface: api.tx.coretime.assignCore

  • summary: Receive instructions from the ExternalBrokerOrigin, detailing how a specific core is to be used.

    Parameters:

    -origin: The ExternalBrokerOrigin, assumed to be the coretime chain.

    -core: The core that should be scheduled.

    -begin: The starting blockheight of the instruction.

    -assignment: How the blockspace should be utilised.

    -end_hint: An optional hint as to when this particular set of instructions will end.

requestCoreCount(count: u16)​

  • interface: api.tx.coretime.requestCoreCount

  • summary: Request the configuration to be updated with the specified number of cores. Warning: Since this only schedules a configuration update, it takes two sessions to come into effect.

    • origin: Root or the Coretime Chain

    • count: total number of cores

requestRevenueAt(when: u32)​

  • interface: api.tx.coretime.requestRevenueAt
  • summary: Request to claim the instantaneous coretime sales revenue starting from the block it was last claimed until and up to the block specified. The claimed amount value is sent back to the Coretime chain in a notify_revenue message. At the same time, the amount is teleported to the Coretime chain.

crowdloan​

addMemo(index: u32, memo: Bytes)​

  • interface: api.tx.crowdloan.addMemo

  • summary: Add an optional memo to an existing crowdloan contribution.

    Origin must be Signed, and the user must have contributed to the crowdloan.

contribute(index: Compact<u32>, value: Compact<u128>, signature: Option<SpRuntimeMultiSignature>)​

  • interface: api.tx.crowdloan.contribute
  • summary: Contribute to a crowd sale. This will transfer some balance over to fund a parachain slot. It will be withdrawable when the crowdloan has ended and the funds are unused.

contributeAll(index: Compact<u32>, signature: Option<SpRuntimeMultiSignature>)​

  • interface: api.tx.crowdloan.contributeAll
  • summary: Contribute your entire balance to a crowd sale. This will transfer the entire balance of a user over to fund a parachain slot. It will be withdrawable when the crowdloan has ended and the funds are unused.

create(index: Compact<u32>, cap: Compact<u128>, first_period: Compact<u32>, last_period: Compact<u32>, end: Compact<u32>, verifier: Option<SpRuntimeMultiSigner>)​

  • interface: api.tx.crowdloan.create

  • summary: Create a new crowdloaning campaign for a parachain slot with the given lease period range.

    This applies a lock to your parachain configuration, ensuring that it cannot be changed by the parachain manager.

dissolve(index: Compact<u32>)​

  • interface: api.tx.crowdloan.dissolve
  • summary: Remove a fund after the retirement period has ended and all funds have been returned.

edit(index: Compact<u32>, cap: Compact<u128>, first_period: Compact<u32>, last_period: Compact<u32>, end: Compact<u32>, verifier: Option<SpRuntimeMultiSigner>)​

  • interface: api.tx.crowdloan.edit

  • summary: Edit the configuration for an in-progress crowdloan.

    Can only be called by Root origin.

poke(index: u32)​

  • interface: api.tx.crowdloan.poke

  • summary: Poke the fund into NewRaise

    Origin must be Signed, and the fund has non-zero raise.

refund(index: Compact<u32>)​

  • interface: api.tx.crowdloan.refund

  • summary: Automatically refund contributors of an ended crowdloan. Due to weight restrictions, this function may need to be called multiple times to fully refund all users. We will refund RemoveKeysLimit users at a time.

    Origin must be signed, but can come from anyone.

withdraw(who: AccountId32, index: Compact<u32>)​

  • interface: api.tx.crowdloan.withdraw

  • summary: Withdraw full balance of a specific contributor.

    Origin must be signed, but can come from anyone.

    The fund must be either in, or ready for, retirement. For a fund to be in retirement, then the retirement flag must be set. For a fund to be ready for retirement, then:

    • it must not already be in retirement;

    • the amount of raised funds must be bigger than the free balance of the account;

    • and either:

    • the block number must be at least end; or

    • the current lease period must be greater than the fund's last_period.

      In this case, the fund's retirement flag is set and its end is reset to the current block number.

    • who: The account whose contribution should be withdrawn.

    • index: The parachain to whose crowdloan the contribution was made.

electionProviderMultiPhase​

governanceFallback(maybe_max_voters: Option<u32>, maybe_max_targets: Option<u32>)​

  • interface: api.tx.electionProviderMultiPhase.governanceFallback

  • summary: Trigger the governance fallback.

    This can only be called when [Phase::Emergency] is enabled, as an alternative to calling [Call::set_emergency_election_result].

setEmergencyElectionResult(supports: Vec<(AccountId32,SpNposElectionsSupport)>)​

  • interface: api.tx.electionProviderMultiPhase.setEmergencyElectionResult

  • summary: Set a solution in the queue, to be handed out to the client of this pallet in the next call to ElectionProvider::elect.

    This can only be set by T::ForceOrigin, and only when the phase is Emergency.

    The solution is not checked for any feasibility and is assumed to be trustworthy, as any feasibility check itself can in principle cause the election process to fail (due to memory/weight constrains).

setMinimumUntrustedScore(maybe_next_score: Option<SpNposElectionsElectionScore>)​

  • interface: api.tx.electionProviderMultiPhase.setMinimumUntrustedScore

  • summary: Set a new value for MinimumUntrustedScore.

    Dispatch origin must be aligned with T::ForceOrigin.

    This check can be turned off by setting the value to None.

submit(raw_solution: PalletElectionProviderMultiPhaseRawSolution)​

  • interface: api.tx.electionProviderMultiPhase.submit

  • summary: Submit a solution for the signed phase.

    The dispatch origin fo this call must be signed.

    The solution is potentially queued, based on the claimed score and processed at the end of the signed phase.

    A deposit is reserved and recorded for the solution. Based on the outcome, the solution might be rewarded, slashed, or get all or a part of the deposit back.

submitUnsigned(raw_solution: PalletElectionProviderMultiPhaseRawSolution, witness: PalletElectionProviderMultiPhaseSolutionOrSnapshotSize)​

  • interface: api.tx.electionProviderMultiPhase.submitUnsigned

  • summary: Submit a solution for the unsigned phase.

    The dispatch origin fo this call must be none.

    This submission is checked on the fly. Moreover, this unsigned solution is only validated when submitted to the pool from the local node. Effectively, this means that only active validators can submit this transaction when authoring a block (similar to an inherent).

    To prevent any incorrect solution (and thus wasted time/weight), this transaction will panic if the solution submitted by the validator is invalid in any way, effectively putting their authoring reward at risk.

    No deposit or reward is associated with this submission.

fastUnstake​

control(eras_to_check: u32)​

  • interface: api.tx.fastUnstake.control

  • summary: Control the operation of this pallet.

    Dispatch Origin​

    The dispatch origin of this call must be [Config::ControlOrigin].

    Details​

    Can set the number of eras to check per block, and potentially other admin work.

    Events​

    No events are emitted from this dispatch.

deregister()​

  • interface: api.tx.fastUnstake.deregister

  • summary: Deregister oneself from the fast-unstake.

    Dispatch Origin​

    The dispatch origin of this call must be signed by whoever is permitted to call unbond funds by the staking system. See [Config::Staking].

    Details​

    This is useful if one is registered, they are still waiting, and they change their mind.

    Note that the associated stash is still fully unbonded and chilled as a consequence of calling [Pallet::register_fast_unstake]. Therefore, this should probably be followed by a call to rebond in the staking system.

    Events​

    Some events from the staking and currency system might be emitted.

registerFastUnstake()​

  • interface: api.tx.fastUnstake.registerFastUnstake

  • summary: Register oneself for fast-unstake.

    Dispatch Origin​

    The dispatch origin of this call must be signed by whoever is permitted to call unbond funds by the staking system. See [Config::Staking].

    Details​

    The stash associated with the origin must have no ongoing unlocking chunks. If successful, this will fully unbond and chill the stash. Then, it will enqueue the stash to be checked in further blocks.

    If by the time this is called, the stash is actually eligible for fast-unstake, then they are guaranteed to remain eligible, because the call will chill them as well.

    If the check works, the entire staking data is removed, i.e. the stash is fully unstaked.

    If the check fails, the stash remains chilled and waiting for being unbonded as in with the normal staking system, but they lose part of their unbonding chunks due to consuming the chain's resources.

    Events​

    Some events from the staking and currency system might be emitted.

fellowshipCollective​

addMember(who: MultiAddress)​

  • interface: api.tx.fellowshipCollective.addMember

  • summary: Introduce a new member.

    • origin: Must be the AddOrigin.

    • who: Account of non-member which will become a member.

      Weight: O(1)

cleanupPoll(poll_index: u32, max: u32)​

  • interface: api.tx.fellowshipCollective.cleanupPoll

  • summary: Remove votes from the given poll. It must have ended.

    • origin: Must be Signed by any account.

    • poll_index: Index of a poll which is completed and for which votes continue to exist.

    • max: Maximum number of vote items from remove in this call.

      Transaction fees are waived if the operation is successful.

      Weight O(max) (less if there are fewer items to remove than max).

demoteMember(who: MultiAddress)​

  • interface: api.tx.fellowshipCollective.demoteMember

  • summary: Decrement the rank of an existing member by one. If the member is already at rank zero, then they are removed entirely.

    • origin: Must be the DemoteOrigin.

    • who: Account of existing member of rank greater than zero.

      Weight: O(1), less if the member's index is highest in its rank.

exchangeMember(who: MultiAddress, new_who: MultiAddress)​

  • interface: api.tx.fellowshipCollective.exchangeMember

  • summary: Exchanges a member with a new account and the same existing rank.

    • origin: Must be the ExchangeOrigin.

    • who: Account of existing member of rank greater than zero to be exchanged.

    • new_who: New Account of existing member of rank greater than zero to exchanged to.

promoteMember(who: MultiAddress)​

  • interface: api.tx.fellowshipCollective.promoteMember

  • summary: Increment the rank of an existing member by one.

    • origin: Must be the PromoteOrigin.

    • who: Account of existing member.

      Weight: O(1)

removeMember(who: MultiAddress, min_rank: u16)​

  • interface: api.tx.fellowshipCollective.removeMember

  • summary: Remove the member entirely.

    • origin: Must be the RemoveOrigin.

    • who: Account of existing member of rank greater than zero.

    • min_rank: The rank of the member or greater.

      Weight: O(min_rank).

vote(poll: u32, aye: bool)​

  • interface: api.tx.fellowshipCollective.vote

  • summary: Add an aye or nay vote for the sender to the given proposal.

    • origin: Must be Signed by a member account.

    • poll: Index of a poll which is ongoing.

    • aye: true if the vote is to approve the proposal, false otherwise.

      Transaction fees are be waived if the member is voting on any particular proposal for the first time and the call is successful. Subsequent vote changes will charge a fee.

      Weight: O(1), less if there was no previous vote on the poll by the member.

fellowshipReferenda​

cancel(index: u32)​

  • interface: api.tx.fellowshipReferenda.cancel

  • summary: Cancel an ongoing referendum.

    • origin: must be the CancelOrigin.

    • index: The index of the referendum to be cancelled.

      Emits Cancelled.

kill(index: u32)​

  • interface: api.tx.fellowshipReferenda.kill

  • summary: Cancel an ongoing referendum and slash the deposits.

    • origin: must be the KillOrigin.

    • index: The index of the referendum to be cancelled.

      Emits Killed and DepositSlashed.

nudgeReferendum(index: u32)​

  • interface: api.tx.fellowshipReferenda.nudgeReferendum

  • summary: Advance a referendum onto its next logical state. Only used internally.

    • origin: must be Root.

    • index: the referendum to be advanced.

oneFewerDeciding(track: u16)​

  • interface: api.tx.fellowshipReferenda.oneFewerDeciding

  • summary: Advance a track onto its next logical state. Only used internally.

    • origin: must be Root.

    • track: the track to be advanced.

      Action item for when there is now one fewer referendum in the deciding phase and the DecidingCount is not yet updated. This means that we should either:

    • begin deciding another referendum (and leave DecidingCount alone); or

    • decrement DecidingCount.

placeDecisionDeposit(index: u32)​

  • interface: api.tx.fellowshipReferenda.placeDecisionDeposit

  • summary: Post the Decision Deposit for a referendum.

    • origin: must be Signed and the account must have funds available for the referendum's track's Decision Deposit.

    • index: The index of the submitted referendum whose Decision Deposit is yet to be posted.

      Emits DecisionDepositPlaced.

refundDecisionDeposit(index: u32)​

  • interface: api.tx.fellowshipReferenda.refundDecisionDeposit

  • summary: Refund the Decision Deposit for a closed referendum back to the depositor.

    • origin: must be Signed or Root.

    • index: The index of a closed referendum whose Decision Deposit has not yet been refunded.

      Emits DecisionDepositRefunded.

refundSubmissionDeposit(index: u32)​

  • interface: api.tx.fellowshipReferenda.refundSubmissionDeposit

  • summary: Refund the Submission Deposit for a closed referendum back to the depositor.

    • origin: must be Signed or Root.

    • index: The index of a closed referendum whose Submission Deposit has not yet been refunded.

      Emits SubmissionDepositRefunded.

setMetadata(index: u32, maybe_hash: Option<H256>)​

  • interface: api.tx.fellowshipReferenda.setMetadata

  • summary: Set or clear metadata of a referendum.

    Parameters:

    • origin: Must be Signed by a creator of a referendum or by anyone to clear a metadata of a finished referendum.

    • index: The index of a referendum to set or clear metadata for.

    • maybe_hash: The hash of an on-chain stored preimage. None to clear a metadata.

submit(proposal_origin: StagingKusamaRuntimeOriginCaller, proposal: FrameSupportPreimagesBounded, enactment_moment: FrameSupportScheduleDispatchTime)​

  • interface: api.tx.fellowshipReferenda.submit

  • summary: Propose a referendum on a privileged action.

    • origin: must be SubmitOrigin and the account must have SubmissionDeposit funds available.

    • proposal_origin: The origin from which the proposal should be executed.

    • proposal: The proposal.

    • enactment_moment: The moment that the proposal should be enacted.

      Emits Submitted.

grandpa​

noteStalled(delay: u32, best_finalized_block_number: u32)​

  • interface: api.tx.grandpa.noteStalled

  • summary: Note that the current authority set of the GRANDPA finality gadget has stalled.

    This will trigger a forced authority set change at the beginning of the next session, to be enacted delay blocks after that. The delay should be high enough to safely assume that the block signalling the forced change will not be re-orged e.g. 1000 blocks. The block production rate (which may be slowed down because of finality lagging) should be taken into account when choosing the delay. The GRANDPA voters based on the new authority will start voting on top of best_finalized_block_number for new finalized blocks. best_finalized_block_number should be the highest of the latest finalized block of all validators of the new authority set.

    Only callable by root.

reportEquivocation(equivocation_proof: SpConsensusGrandpaEquivocationProof, key_owner_proof: SpSessionMembershipProof)​

  • interface: api.tx.grandpa.reportEquivocation
  • summary: Report voter equivocation/misbehavior. This method will verify the equivocation proof and validate the given key ownership proof against the extracted offender. If both are valid, the offence will be reported.

reportEquivocationUnsigned(equivocation_proof: SpConsensusGrandpaEquivocationProof, key_owner_proof: SpSessionMembershipProof)​

  • interface: api.tx.grandpa.reportEquivocationUnsigned

  • summary: Report voter equivocation/misbehavior. This method will verify the equivocation proof and validate the given key ownership proof against the extracted offender. If both are valid, the offence will be reported.

    This extrinsic must be called unsigned and it is expected that only block authors will call it (validated in ValidateUnsigned), as such if the block author is defined it will be defined as the equivocation reporter.

hrmp​

establishChannelWithSystem(target_system_chain: u32)​

  • interface: api.tx.hrmp.establishChannelWithSystem

  • summary: Establish a bidirectional HRMP channel between a parachain and a system chain.

    Arguments:

    • target_system_chain: A system chain, ParaId.

      The origin needs to be the parachain origin.

establishSystemChannel(sender: u32, recipient: u32)​

  • interface: api.tx.hrmp.establishSystemChannel

  • summary: Establish an HRMP channel between two system chains. If the channel does not already exist, the transaction fees will be refunded to the caller. The system does not take deposits for channels between system chains, and automatically sets the message number and size limits to the maximum allowed by the network's configuration.

    Arguments:

    • sender: A system chain, ParaId.

    • recipient: A system chain, ParaId.

      Any signed origin can call this function, but both inputs MUST be system chains. If the channel does not exist yet, there is no fee.

forceCleanHrmp(para: u32, num_inbound: u32, num_outbound: u32)​

  • interface: api.tx.hrmp.forceCleanHrmp

  • summary: This extrinsic triggers the cleanup of all the HRMP storage items that a para may have. Normally this happens once per session, but this allows you to trigger the cleanup immediately for a specific parachain.

    Number of inbound and outbound channels for para must be provided as witness data.

    Origin must be the ChannelManager.

forceOpenHrmpChannel(sender: u32, recipient: u32, max_capacity: u32, max_message_size: u32)​

  • interface: api.tx.hrmp.forceOpenHrmpChannel

  • summary: Open a channel from a sender to a recipient ParaId. Although opened by governance, the max_capacity and max_message_size are still subject to the Relay Chain's configured limits.

    Expected use is when one (and only one) of the ParaIds involved in the channel is governed by the system, e.g. a system parachain.

    Origin must be the ChannelManager.

forceProcessHrmpClose(channels: u32)​

  • interface: api.tx.hrmp.forceProcessHrmpClose

  • summary: Force process HRMP close channel requests.

    If there are pending HRMP close channel requests, you can use this function to process all of those requests immediately.

    Total number of closing channels must be provided as witness data.

    Origin must be the ChannelManager.

forceProcessHrmpOpen(channels: u32)​

  • interface: api.tx.hrmp.forceProcessHrmpOpen

  • summary: Force process HRMP open channel requests.

    If there are pending HRMP open channel requests, you can use this function to process all of those requests immediately.

    Total number of opening channels must be provided as witness data.

    Origin must be the ChannelManager.

hrmpAcceptOpenChannel(sender: u32)​

  • interface: api.tx.hrmp.hrmpAcceptOpenChannel

  • summary: Accept a pending open channel request from the given sender.

    The channel will be opened only on the next session boundary.

hrmpCancelOpenRequest(channel_id: PolkadotParachainPrimitivesPrimitivesHrmpChannelId, open_requests: u32)​

  • interface: api.tx.hrmp.hrmpCancelOpenRequest

  • summary: This cancels a pending open channel request. It can be canceled by either of the sender or the recipient for that request. The origin must be either of those.

    The cancellation happens immediately. It is not possible to cancel the request if it is already accepted.

    Total number of open requests (i.e. HrmpOpenChannelRequestsList) must be provided as witness data.

hrmpCloseChannel(channel_id: PolkadotParachainPrimitivesPrimitivesHrmpChannelId)​

  • interface: api.tx.hrmp.hrmpCloseChannel

  • summary: Initiate unilateral closing of a channel. The origin must be either the sender or the recipient in the channel being closed.

    The closure can only happen on a session change.

hrmpInitOpenChannel(recipient: u32, proposed_max_capacity: u32, proposed_max_message_size: u32)​

  • interface: api.tx.hrmp.hrmpInitOpenChannel

  • summary: Initiate opening a channel from a parachain to a given recipient with given channel parameters.

    • proposed_max_capacity - specifies how many messages can be in the channel at once.

    • proposed_max_message_size - specifies the maximum size of the messages.

      These numbers are a subject to the relay-chain configuration limits.

      The channel can be opened only after the recipient confirms it and only on a session change.

pokeChannelDeposits(sender: u32, recipient: u32)​

  • interface: api.tx.hrmp.pokeChannelDeposits

  • summary: Update the deposits held for an HRMP channel to the latest Configuration. Channels with system chains do not require a deposit.

    Arguments:

    • sender: A chain, ParaId.

    • recipient: A chain, ParaId.

      Any signed origin can call this function.

indices​

claim(index: u32)​

  • interface: api.tx.indices.claim

  • summary: Assign an previously unassigned index.

    Payment: Deposit is reserved from the sender account.

    The dispatch origin for this call must be Signed.

    • index: the index to be claimed. This must not be in use.

      Emits IndexAssigned if successful.

      Complexity​

    • O(1).

forceTransfer(new: MultiAddress, index: u32, freeze: bool)​

  • interface: api.tx.indices.forceTransfer

  • summary: Force an index to an account. This doesn't require a deposit. If the index is already held, then any deposit is reimbursed to its current owner.

    The dispatch origin for this call must be Root.

    • index: the index to be (re-)assigned.

    • new: the new owner of the index. This function is a no-op if it is equal to sender.

    • freeze: if set to true, will freeze the index so it cannot be transferred.

      Emits IndexAssigned if successful.

      Complexity​

    • O(1).

free(index: u32)​

  • interface: api.tx.indices.free

  • summary: Free up an index owned by the sender.

    Payment: Any previous deposit placed for the index is unreserved in the sender account.

    The dispatch origin for this call must be Signed and the sender must own the index.

    • index: the index to be freed. This must be owned by the sender.

      Emits IndexFreed if successful.

      Complexity​

    • O(1).

freeze(index: u32)​

  • interface: api.tx.indices.freeze

  • summary: Freeze an index so it will always point to the sender account. This consumes the deposit.

    The dispatch origin for this call must be Signed and the signing account must have a non-frozen account index.

    • index: the index to be frozen in place.

      Emits IndexFrozen if successful.

      Complexity​

    • O(1).

transfer(new: MultiAddress, index: u32)​

  • interface: api.tx.indices.transfer

  • summary: Assign an index already owned by the sender to another account. The balance reservation is effectively transferred to the new account.

    The dispatch origin for this call must be Signed.

    • index: the index to be re-assigned. This must be owned by the sender.

    • new: the new owner of the index. This function is a no-op if it is equal to sender.

      Emits IndexAssigned if successful.

      Complexity​

    • O(1).

initializer​

forceApprove(up_to: u32)​

  • interface: api.tx.initializer.forceApprove
  • summary: Issue a signal to the consensus engine to forcibly act as though all parachain blocks in all relay chain blocks up to and including the given number in the current chain are valid and should be finalized.

messageQueue​

executeOverweight(message_origin: PolkadotRuntimeParachainsInclusionAggregateMessageOrigin, page: u32, index: u32, weight_limit: SpWeightsWeightV2Weight)​

  • interface: api.tx.messageQueue.executeOverweight

  • summary: Execute an overweight message.

    Temporary processing errors will be propagated whereas permanent errors are treated as success condition.

    • origin: Must be Signed.

    • message_origin: The origin from which the message to be executed arrived.

    • page: The page in the queue in which the message to be executed is sitting.

    • index: The index into the queue of the message to be executed.

    • weight_limit: The maximum amount of weight allowed to be consumed in the execution of the message.

      Benchmark complexity considerations: O(index + weight_limit).

reapPage(message_origin: PolkadotRuntimeParachainsInclusionAggregateMessageOrigin, page_index: u32)​

  • interface: api.tx.messageQueue.reapPage
  • summary: Remove a page which has no more messages remaining to be processed or is stale.

multisig​

approveAsMulti(threshold: u16, other_signatories: Vec<AccountId32>, maybe_timepoint: Option<PalletMultisigTimepoint>, call_hash: [u8;32], max_weight: SpWeightsWeightV2Weight)​

  • interface: api.tx.multisig.approveAsMulti

  • summary: Register approval for a dispatch to be made from a deterministic composite account if approved by a total of threshold - 1 of other_signatories.

    Payment: DepositBase will be reserved if this is the first approval, plus threshold times DepositFactor. It is returned once this dispatch happens or is cancelled.

    The dispatch origin for this call must be Signed.

    • threshold: The total number of approvals for this dispatch before it is executed.

    • other_signatories: The accounts (other than the sender) who can approve this dispatch. May not be empty.

    • maybe_timepoint: If this is the first approval, then this must be None. If it is not the first approval, then it must be Some, with the timepoint (block number and transaction index) of the first approval transaction.

    • call_hash: The hash of the call to be executed.

      NOTE: If this is the final approval, you will want to use as_multi instead.

      Complexity​

    • O(S).

    • Up to one balance-reserve or unreserve operation.

    • One passthrough operation, one insert, both O(S) where S is the number of signatories. S is capped by MaxSignatories, with weight being proportional.

    • One encode & hash, both of complexity O(S).

    • Up to one binary search and insert (O(logS + S)).

    • I/O: 1 read O(S), up to 1 mutate O(S). Up to one remove.

    • One event.

    • Storage: inserts one item, value size bounded by MaxSignatories, with a deposit taken for its lifetime of DepositBase + threshold * DepositFactor.

asMulti(threshold: u16, other_signatories: Vec<AccountId32>, maybe_timepoint: Option<PalletMultisigTimepoint>, call: Call, max_weight: SpWeightsWeightV2Weight)​

  • interface: api.tx.multisig.asMulti

  • summary: Register approval for a dispatch to be made from a deterministic composite account if approved by a total of threshold - 1 of other_signatories.

    If there are enough, then dispatch the call.

    Payment: DepositBase will be reserved if this is the first approval, plus threshold times DepositFactor. It is returned once this dispatch happens or is cancelled.

    The dispatch origin for this call must be Signed.

    • threshold: The total number of approvals for this dispatch before it is executed.

    • other_signatories: The accounts (other than the sender) who can approve this dispatch. May not be empty.

    • maybe_timepoint: If this is the first approval, then this must be None. If it is not the first approval, then it must be Some, with the timepoint (block number and transaction index) of the first approval transaction.

    • call: The call to be executed.

      NOTE: Unless this is the final approval, you will generally want to use approve_as_multi instead, since it only requires a hash of the call.

      Result is equivalent to the dispatched result if threshold is exactly 1. Otherwise on success, result is Ok and the result from the interior call, if it was executed, may be found in the deposited MultisigExecuted event.

      Complexity​

    • O(S + Z + Call).

    • Up to one balance-reserve or unreserve operation.

    • One passthrough operation, one insert, both O(S) where S is the number of signatories. S is capped by MaxSignatories, with weight being proportional.

    • One call encode & hash, both of complexity O(Z) where Z is tx-len.

    • One encode & hash, both of complexity O(S).

    • Up to one binary search and insert (O(logS + S)).

    • I/O: 1 read O(S), up to 1 mutate O(S). Up to one remove.

    • One event.

    • The weight of the call.

    • Storage: inserts one item, value size bounded by MaxSignatories, with a deposit taken for its lifetime of DepositBase + threshold * DepositFactor.

asMultiThreshold1(other_signatories: Vec<AccountId32>, call: Call)​

  • interface: api.tx.multisig.asMultiThreshold1

  • summary: Immediately dispatch a multi-signature call using a single approval from the caller.

    The dispatch origin for this call must be Signed.

    • other_signatories: The accounts (other than the sender) who are part of the multi-signature, but do not participate in the approval process.

    • call: The call to be executed.

      Result is equivalent to the dispatched result.

      Complexity O(Z + C) where Z is the length of the call and C its execution weight.​

cancelAsMulti(threshold: u16, other_signatories: Vec<AccountId32>, timepoint: PalletMultisigTimepoint, call_hash: [u8;32])​

  • interface: api.tx.multisig.cancelAsMulti

  • summary: Cancel a pre-existing, on-going multisig transaction. Any deposit reserved previously for this operation will be unreserved on success.

    The dispatch origin for this call must be Signed.

    • threshold: The total number of approvals for this dispatch before it is executed.

    • other_signatories: The accounts (other than the sender) who can approve this dispatch. May not be empty.

    • timepoint: The timepoint (block number and transaction index) of the first approval transaction for this dispatch.

    • call_hash: The hash of the call to be executed.

      Complexity​

    • O(S).

    • Up to one balance-reserve or unreserve operation.

    • One passthrough operation, one insert, both O(S) where S is the number of signatories. S is capped by MaxSignatories, with weight being proportional.

    • One encode & hash, both of complexity O(S).

    • One event.

    • I/O: 1 read O(S), one remove.

    • Storage: removes one item.

nis​

communify(index: Compact<u32>)​

  • interface: api.tx.nis.communify
  • summary: Make a private receipt communal and create fungible counterparts for its owner.

fundDeficit()​

  • interface: api.tx.nis.fundDeficit

  • summary: Ensure we have sufficient funding for all potential payouts.

    • origin: Must be accepted by FundOrigin.

placeBid(amount: Compact<u128>, duration: u32)​

  • interface: api.tx.nis.placeBid

  • summary: Place a bid.

    Origin must be Signed, and account must have at least amount in free balance.

    • amount: The amount of the bid; these funds will be reserved, and if/when consolidated, removed. Must be at least MinBid.

    • duration: The number of periods before which the newly consolidated bid may be thawed. Must be greater than 1 and no more than QueueCount.

      Complexities:

    • Queues[duration].len() (just take max).

privatize(index: Compact<u32>)​

  • interface: api.tx.nis.privatize
  • summary: Make a communal receipt private and burn fungible counterparts from its owner.

retractBid(amount: Compact<u128>, duration: u32)​

  • interface: api.tx.nis.retractBid

  • summary: Retract a previously placed bid.

    Origin must be Signed, and the account should have previously issued a still-active bid of amount for duration.

    • amount: The amount of the previous bid.

    • duration: The duration of the previous bid.

thawCommunal(index: Compact<u32>)​

  • interface: api.tx.nis.thawCommunal

  • summary: Reduce or remove an outstanding receipt, placing the according proportion of funds into the account of the owner.

    • origin: Must be Signed and the account must be the owner of the fungible counterpart for receipt index.

    • index: The index of the receipt.

thawPrivate(index: Compact<u32>, maybe_proportion: Option<Perquintill>)​

  • interface: api.tx.nis.thawPrivate

  • summary: Reduce or remove an outstanding receipt, placing the according proportion of funds into the account of the owner.

    • origin: Must be Signed and the account must be the owner of the receipt index as well as any fungible counterpart.

    • index: The index of the receipt.

    • portion: If Some, then only the given portion of the receipt should be thawed. If None, then all of it should be.

nisCounterpartBalances​

burn(value: Compact<u128>, keep_alive: bool)​

  • interface: api.tx.nisCounterpartBalances.burn

  • summary: Burn the specified liquid free balance from the origin account.

    If the origin's account ends up below the existential deposit as a result of the burn and keep_alive is false, the account will be reaped.

    Unlike sending funds to a burn address, which merely makes the funds inaccessible, this burn operation will reduce total issuance by the amount burned.

forceAdjustTotalIssuance(direction: PalletBalancesAdjustmentDirection, delta: Compact<u128>)​

  • interface: api.tx.nisCounterpartBalances.forceAdjustTotalIssuance

  • summary: Adjust the total issuance in a saturating way.

    Can only be called by root and always needs a positive delta.

    Example​

forceSetBalance(who: MultiAddress, new_free: Compact<u128>)​

  • interface: api.tx.nisCounterpartBalances.forceSetBalance

  • summary: Set the regular balance of a given account.

    The dispatch origin for this call is root.

forceTransfer(source: MultiAddress, dest: MultiAddress, value: Compact<u128>)​

  • interface: api.tx.nisCounterpartBalances.forceTransfer
  • summary: Exactly as transfer_allow_death, except the origin must be root and the source account may be specified.

forceUnreserve(who: MultiAddress, amount: u128)​

  • interface: api.tx.nisCounterpartBalances.forceUnreserve

  • summary: Unreserve some balance from a user by force.

    Can only be called by ROOT.

transferAll(dest: MultiAddress, keep_alive: bool)​

  • interface: api.tx.nisCounterpartBalances.transferAll

  • summary: Transfer the entire transferable balance from the caller account.

    NOTE: This function only attempts to transfer transferable balances. This means that any locked, reserved, or existential deposits (when keep_alive is true), will not be transferred by this function. To ensure that this function results in a killed account, you might need to prepare the account by removing any reference counters, storage deposits, etc...

    The dispatch origin of this call must be Signed.

    • dest: The recipient of the transfer.

    • keep_alive: A boolean to determine if the transfer_all operation should send all of the funds the account has, causing the sender account to be killed (false), or transfer everything except at least the existential deposit, which will guarantee to keep the sender account alive (true).

transferAllowDeath(dest: MultiAddress, value: Compact<u128>)​

  • interface: api.tx.nisCounterpartBalances.transferAllowDeath

  • summary: Transfer some liquid free balance to another account.

    transfer_allow_death will set the FreeBalance of the sender and receiver. If the sender's account is below the existential deposit as a result of the transfer, the account will be reaped.

    The dispatch origin for this call must be Signed by the transactor.

transferKeepAlive(dest: MultiAddress, value: Compact<u128>)​

  • interface: api.tx.nisCounterpartBalances.transferKeepAlive

  • summary: Same as the transfer_allow_death call, but with a check that the transfer will not kill the origin account.

    99% of the time you want transfer_allow_death instead.

upgradeAccounts(who: Vec<AccountId32>)​

  • interface: api.tx.nisCounterpartBalances.upgradeAccounts

  • summary: Upgrade a specified account.

    • origin: Must be Signed.

    • who: The account to be upgraded.

      This will waive the transaction fee if at least all but 10% of the accounts needed to be upgraded. (We let some not have to be upgraded just in order to allow for the possibility of churn).

nominationPools​

adjustPoolDeposit(pool_id: u32)​

  • interface: api.tx.nominationPools.adjustPoolDeposit

  • summary: Top up the deficit or withdraw the excess ED from the pool.

    When a pool is created, the pool depositor transfers ED to the reward account of the pool. ED is subject to change and over time, the deposit in the reward account may be insufficient to cover the ED deficit of the pool or vice-versa where there is excess deposit to the pool. This call allows anyone to adjust the ED deposit of the pool by either topping up the deficit or claiming the excess.

applySlash(member_account: MultiAddress)​

  • interface: api.tx.nominationPools.applySlash

  • summary: Apply a pending slash on a member.

    Fails unless [crate::pallet::Config::StakeAdapter] is of strategy type: [adapter::StakeStrategyType::Delegate].

    This call can be dispatched permissionlessly (i.e. by any account). If the member has slash to be applied, caller may be rewarded with the part of the slash.

bondExtra(extra: PalletNominationPoolsBondExtra)​

  • interface: api.tx.nominationPools.bondExtra

  • summary: Bond extra more funds from origin into the pool to which they already belong.

    Additional funds can come from either the free balance of the account, of from the accumulated rewards, see [BondExtra].

    Bonding extra funds implies an automatic payout of all pending rewards as well. See bond_extra_other to bond pending rewards of other members.

bondExtraOther(member: MultiAddress, extra: PalletNominationPoolsBondExtra)​

  • interface: api.tx.nominationPools.bondExtraOther

  • summary: origin bonds funds from extra for some pool member member into their respective pools.

    origin can bond extra funds from free balance or pending rewards when origin == other.

    In the case of origin != other, origin can only bond extra pending rewards of other members assuming set_claim_permission for the given member is PermissionlessCompound or PermissionlessAll.

chill(pool_id: u32)​

  • interface: api.tx.nominationPools.chill

  • summary: Chill on behalf of the pool.

    The dispatch origin of this call can be signed by the pool nominator or the pool root role, same as [Pallet::nominate].

    Under certain conditions, this call can be dispatched permissionlessly (i.e. by any account).

    Conditions for a permissionless dispatch:​

    • When pool depositor has less than MinNominatorBond staked, otherwise pool members are unable to unbond.

      Conditions for permissioned dispatch:​

    • The caller has a nominator or root role of the pool. This directly forward the call to the staking pallet, on behalf of the pool bonded account.

claimCommission(pool_id: u32)​

  • interface: api.tx.nominationPools.claimCommission

  • summary: Claim pending commission.

    The dispatch origin of this call must be signed by the root role of the pool. Pending commission is paid out and added to total claimed commission`. Total pending commission is reset to zero. the current.

claimPayout()​

  • interface: api.tx.nominationPools.claimPayout

  • summary: A bonded member can use this to claim their payout based on the rewards that the pool has accumulated since their last claimed payout (OR since joining if this is their first time claiming rewards). The payout will be transferred to the member's account.

    The member will earn rewards pro rata based on the members stake vs the sum of the members in the pools stake. Rewards do not "expire".

    See claim_payout_other to claim rewards on behalf of some other pool member.

claimPayoutOther(other: AccountId32)​

  • interface: api.tx.nominationPools.claimPayoutOther

  • summary: origin can claim payouts on some pool member other's behalf.

    Pool member other must have a PermissionlessWithdraw or PermissionlessAll claim permission for this call to be successful.

create(amount: Compact<u128>, root: MultiAddress, nominator: MultiAddress, bouncer: MultiAddress)​

  • interface: api.tx.nominationPools.create

  • summary: Create a new delegation pool.

    Arguments​

    • amount - The amount of funds to delegate to the pool. This also acts of a sort of deposit since the pools creator cannot fully unbond funds until the pool is being destroyed.

    • index - A disambiguation index for creating the account. Likely only useful when creating multiple pools in the same extrinsic.

    • root - The account to set as [PoolRoles::root].

    • nominator - The account to set as the [PoolRoles::nominator].

    • bouncer - The account to set as the [PoolRoles::bouncer].

      Note​

      In addition to amount, the caller will transfer the existential deposit; so the caller needs at have at least amount + existential_deposit transferable.

createWithPoolId(amount: Compact<u128>, root: MultiAddress, nominator: MultiAddress, bouncer: MultiAddress, pool_id: u32)​

  • interface: api.tx.nominationPools.createWithPoolId

  • summary: Create a new delegation pool with a previously used pool id

    Arguments​

    same as create with the inclusion of

    • pool_id - `A valid PoolId.

join(amount: Compact<u128>, pool_id: u32)​

  • interface: api.tx.nominationPools.join

  • summary: Stake funds with a pool. The amount to bond is transferred from the member to the pools account and immediately increases the pools bond.

    Note​

    • An account can only be a member of a single pool.

    • An account cannot join the same pool multiple times.

    • This call will not dust the member account, so the member must have at least existential deposit + amount in their account.

    • Only a pool with [PoolState::Open] can be joined

migrateDelegation(member_account: MultiAddress)​

  • interface: api.tx.nominationPools.migrateDelegation

  • summary: Migrates delegated funds from the pool account to the member_account.

    Fails unless [crate::pallet::Config::StakeAdapter] is of strategy type: [adapter::StakeStrategyType::Delegate].

    This is a permission-less call and refunds any fee if claim is successful.

    If the pool has migrated to delegation based staking, the staked tokens of pool members can be moved and held in their own account. See [adapter::DelegateStake]

migratePoolToDelegateStake(pool_id: u32)​

  • interface: api.tx.nominationPools.migratePoolToDelegateStake

  • summary: Migrate pool from [adapter::StakeStrategyType::Transfer] to [adapter::StakeStrategyType::Delegate].

    Fails unless [crate::pallet::Config::StakeAdapter] is of strategy type: [adapter::StakeStrategyType::Delegate].

    This call can be dispatched permissionlessly, and refunds any fee if successful.

    If the pool has already migrated to delegation based staking, this call will fail.

nominate(pool_id: u32, validators: Vec<AccountId32>)​

  • interface: api.tx.nominationPools.nominate

  • summary: Nominate on behalf of the pool.

    The dispatch origin of this call must be signed by the pool nominator or the pool root role.

    This directly forward the call to the staking pallet, on behalf of the pool bonded account.

    Note​

    In addition to a root or nominator role of origin, pool's depositor needs to have at least depositor_min_bond in the pool to start nominating.

poolWithdrawUnbonded(pool_id: u32, num_slashing_spans: u32)​

  • interface: api.tx.nominationPools.poolWithdrawUnbonded

  • summary: Call withdraw_unbonded for the pools account. This call can be made by any account.

    This is useful if there are too many unlocking chunks to call unbond, and some can be cleared by withdrawing. In the case there are too many unlocking chunks, the user would probably see an error like NoMoreChunks emitted from the staking system when they attempt to unbond.

setClaimPermission(permission: PalletNominationPoolsClaimPermission)​

  • interface: api.tx.nominationPools.setClaimPermission

  • summary: Allows a pool member to set a claim permission to allow or disallow permissionless bonding and withdrawing.

    Arguments​

    • origin - Member of a pool.

    • permission - The permission to be applied.

setCommission(pool_id: u32, new_commission: Option<(Perbill,AccountId32)>)​

  • interface: api.tx.nominationPools.setCommission

  • summary: Set the commission of a pool. Both a commission percentage and a commission payee must be provided in the current tuple. Where a current of None is provided, any current commission will be removed.

    • If a None is supplied to new_commission, existing commission will be removed.

setCommissionChangeRate(pool_id: u32, change_rate: PalletNominationPoolsCommissionChangeRate)​

  • interface: api.tx.nominationPools.setCommissionChangeRate

  • summary: Set the commission change rate for a pool.

    Initial change rate is not bounded, whereas subsequent updates can only be more restrictive than the current.

setCommissionClaimPermission(pool_id: u32, permission: Option<PalletNominationPoolsCommissionClaimPermission>)​

  • interface: api.tx.nominationPools.setCommissionClaimPermission

  • summary: Set or remove a pool's commission claim permission.

    Determines who can claim the pool's pending commission. Only the Root role of the pool is able to configure commission claim permissions.

setCommissionMax(pool_id: u32, max_commission: Perbill)​

  • interface: api.tx.nominationPools.setCommissionMax

  • summary: Set the maximum commission of a pool.

    • Initial max can be set to any Perbill, and only smaller values thereafter.

    • Current commission will be lowered in the event it is higher than a new max commission.

setConfigs(min_join_bond: PalletNominationPoolsConfigOpU128, min_create_bond: PalletNominationPoolsConfigOpU128, max_pools: PalletNominationPoolsConfigOpU32, max_members: PalletNominationPoolsConfigOpU32, max_members_per_pool: PalletNominationPoolsConfigOpU32, global_max_commission: PalletNominationPoolsConfigOpPerbill)​

  • interface: api.tx.nominationPools.setConfigs

  • summary: Update configurations for the nomination pools. The origin for this call must be [Config::AdminOrigin].

    Arguments​

    • min_join_bond - Set [MinJoinBond].

    • min_create_bond - Set [MinCreateBond].

    • max_pools - Set [MaxPools].

    • max_members - Set [MaxPoolMembers].

    • max_members_per_pool - Set [MaxPoolMembersPerPool].

    • global_max_commission - Set [GlobalMaxCommission].

setMetadata(pool_id: u32, metadata: Bytes)​

  • interface: api.tx.nominationPools.setMetadata

  • summary: Set a new metadata for the pool.

    The dispatch origin of this call must be signed by the bouncer, or the root role of the pool.

setState(pool_id: u32, state: PalletNominationPoolsPoolState)​

  • interface: api.tx.nominationPools.setState

  • summary: Set a new state for the pool.

    If a pool is already in the Destroying state, then under no condition can its state change again.

    The dispatch origin of this call must be either:

    1. signed by the bouncer, or the root role of the pool, 2. if the pool conditions to be open are NOT met (as described by ok_to_be_open), and then the state of the pool can be permissionlessly changed to Destroying.

unbond(member_account: MultiAddress, unbonding_points: Compact<u128>)​

  • interface: api.tx.nominationPools.unbond

  • summary: Unbond up to unbonding_points of the member_account's funds from the pool. It implicitly collects the rewards one last time, since not doing so would mean some rewards would be forfeited.

    Under certain conditions, this call can be dispatched permissionlessly (i.e. by any account).

    Conditions for a permissionless dispatch.​

    • The pool is blocked and the caller is either the root or bouncer. This is refereed to as a kick.

    • The pool is destroying and the member is not the depositor.

    • The pool is destroying, the member is the depositor and no other members are in the pool.

      Conditions for permissioned dispatch (i.e. the caller is also the member_account):​

    • The caller is not the depositor.

    • The caller is the depositor, the pool is destroying and no other members are in the pool.

      Note​

      If there are too many unlocking chunks to unbond with the pool account, [Call::pool_withdraw_unbonded] can be called to try and minimize unlocking chunks. The [StakingInterface::unbond] will implicitly call [Call::pool_withdraw_unbonded] to try to free chunks if necessary (ie. if unbound was called and no unlocking chunks are available). However, it may not be possible to release the current unlocking chunks, in which case, the result of this call will likely be the NoMoreChunks error from the staking system.

updateRoles(pool_id: u32, new_root: PalletNominationPoolsConfigOpAccountId32, new_nominator: PalletNominationPoolsConfigOpAccountId32, new_bouncer: PalletNominationPoolsConfigOpAccountId32)​

  • interface: api.tx.nominationPools.updateRoles

  • summary: Update the roles of the pool.

    The root is the only entity that can change any of the roles, including itself, excluding the depositor, who can never change.

    It emits an event, notifying UIs of the role change. This event is quite relevant to most pool members and they should be informed of changes to pool roles.

withdrawUnbonded(member_account: MultiAddress, num_slashing_spans: u32)​

  • interface: api.tx.nominationPools.withdrawUnbonded

  • summary: Withdraw unbonded funds from member_account. If no bonded funds can be unbonded, an error is returned.

    Under certain conditions, this call can be dispatched permissionlessly (i.e. by any account).

    Conditions for a permissionless dispatch​

    • The pool is in destroy mode and the target is not the depositor.

    • The target is the depositor and they are the only member in the sub pools.

    • The pool is blocked and the caller is either the root or bouncer.

      Conditions for permissioned dispatch​

    • The caller is the target and they are not the depositor.

      Note​

    • If the target is the depositor, the pool will be destroyed.

    • If the pool has any pending slash, we also try to slash the member before letting them withdraw. This calculation adds some weight overhead and is only defensive. In reality, pool slashes must have been already applied via permissionless [Call::apply_slash].

onDemandAssignmentProvider​

placeOrderAllowDeath(max_amount: u128, para_id: u32)​

  • interface: api.tx.onDemandAssignmentProvider.placeOrderAllowDeath

  • summary: Create a single on demand core order. Will use the spot price for the current block and will reap the account if needed.

    Parameters:

    • origin: The sender of the call, funds will be withdrawn from this account.

    • max_amount: The maximum balance to withdraw from the origin to place an order.

    • para_id: A ParaId the origin wants to provide blockspace for.

      Errors:

    • InsufficientBalance: from the Currency implementation

    • QueueFull

    • SpotPriceHigherThanMaxAmount

      Events:

    • OnDemandOrderPlaced

placeOrderKeepAlive(max_amount: u128, para_id: u32)​

  • interface: api.tx.onDemandAssignmentProvider.placeOrderKeepAlive

  • summary: Same as the place_order_allow_death call , but with a check that placing the order will not reap the account.

    Parameters:

    • origin: The sender of the call, funds will be withdrawn from this account.

    • max_amount: The maximum balance to withdraw from the origin to place an order.

    • para_id: A ParaId the origin wants to provide blockspace for.

      Errors:

    • InsufficientBalance: from the Currency implementation

    • QueueFull

    • SpotPriceHigherThanMaxAmount

      Events:

    • OnDemandOrderPlaced

paraInclusion​

paraInherent​

enter(data: PolkadotPrimitivesV7InherentData)​

  • interface: api.tx.paraInherent.enter
  • summary: Enter the paras inherent. This will process bitfields and backed candidates.

parameters​

setParameter(key_value: StagingKusamaRuntimeRuntimeParameters)​

  • interface: api.tx.parameters.setParameter

  • summary: Set the value of a parameter.

    The dispatch origin of this call must be AdminOrigin for the given key. Values be deleted by setting them to None.

paras​

addTrustedValidationCode(validation_code: Bytes)​

  • interface: api.tx.paras.addTrustedValidationCode

  • summary: Adds the validation code to the storage.

    The code will not be added if it is already present. Additionally, if PVF pre-checking is running for that code, it will be instantly accepted.

    Otherwise, the code will be added into the storage. Note that the code will be added into storage with reference count 0. This is to account the fact that there are no users for this code yet. The caller will have to make sure that this code eventually gets used by some parachain or removed from the storage to avoid storage leaks. For the latter prefer to use the poke_unused_validation_code dispatchable to raw storage manipulation.

    This function is mainly meant to be used for upgrading parachains that do not follow the go-ahead signal while the PVF pre-checking feature is enabled.

forceNoteNewHead(para: u32, new_head: Bytes)​

  • interface: api.tx.paras.forceNoteNewHead
  • summary: Note a new block head for para within the context of the current block.

forceQueueAction(para: u32)​

  • interface: api.tx.paras.forceQueueAction
  • summary: Put a parachain directly into the next session's action queue. We can't queue it any sooner than this without going into the initializer...

forceScheduleCodeUpgrade(para: u32, new_code: Bytes, relay_parent_number: u32)​

  • interface: api.tx.paras.forceScheduleCodeUpgrade
  • summary: Schedule an upgrade as if it was scheduled in the given relay parent block.

forceSetCurrentCode(para: u32, new_code: Bytes)​

  • interface: api.tx.paras.forceSetCurrentCode
  • summary: Set the storage for the parachain validation code immediately.

forceSetCurrentHead(para: u32, new_head: Bytes)​

  • interface: api.tx.paras.forceSetCurrentHead
  • summary: Set the storage for the current parachain head data immediately.

forceSetMostRecentContext(para: u32, context: u32)​

  • interface: api.tx.paras.forceSetMostRecentContext
  • summary: Set the storage for the current parachain head data immediately.

includePvfCheckStatement(stmt: PolkadotPrimitivesV7PvfCheckStatement, signature: PolkadotPrimitivesV7ValidatorAppSignature)​

  • interface: api.tx.paras.includePvfCheckStatement
  • summary: Includes a statement for a PVF pre-checking vote. Potentially, finalizes the vote and enacts the results if that was the last vote before achieving the supermajority.

pokeUnusedValidationCode(validation_code_hash: H256)​

  • interface: api.tx.paras.pokeUnusedValidationCode

  • summary: Remove the validation code from the storage iff the reference count is 0.

    This is better than removing the storage directly, because it will not remove the code that was suddenly got used by some parachain while this dispatchable was pending dispatching.

parasDisputes​

forceUnfreeze()​

  • interface: api.tx.parasDisputes.forceUnfreeze

parasShared​

parasSlashing​

reportDisputeLostUnsigned(dispute_proof: PolkadotPrimitivesV7SlashingDisputeProof, key_owner_proof: SpSessionMembershipProof)​

  • interface: api.tx.parasSlashing.reportDisputeLostUnsigned

preimage​

ensureUpdated(hashes: Vec<H256>)​

  • interface: api.tx.preimage.ensureUpdated

  • summary: Ensure that the a bulk of pre-images is upgraded.

    The caller pays no fee if at least 90% of pre-images were successfully updated.

notePreimage(bytes: Bytes)​

  • interface: api.tx.preimage.notePreimage

  • summary: Register a preimage on-chain.

    If the preimage was previously requested, no fees or deposits are taken for providing the preimage. Otherwise, a deposit is taken proportional to the size of the preimage.

requestPreimage(hash: H256)​

  • interface: api.tx.preimage.requestPreimage

  • summary: Request a preimage be uploaded to the chain without paying any fees or deposits.

    If the preimage requests has already been provided on-chain, we unreserve any deposit a user may have paid, and take the control of the preimage out of their hands.

unnotePreimage(hash: H256)​

  • interface: api.tx.preimage.unnotePreimage

  • summary: Clear an unrequested preimage from the runtime storage.

    If len is provided, then it will be a much cheaper operation.

    • hash: The hash of the preimage to be removed from the store.

    • len: The length of the preimage of hash.

unrequestPreimage(hash: H256)​

  • interface: api.tx.preimage.unrequestPreimage

  • summary: Clear a previously made request for a preimage.

    NOTE: THIS MUST NOT BE CALLED ON hash MORE TIMES THAN request_preimage.

proxy​

addProxy(delegate: MultiAddress, proxy_type: StagingKusamaRuntimeProxyType, delay: u32)​

  • interface: api.tx.proxy.addProxy

  • summary: Register a proxy account for the sender that is able to make calls on its behalf.

    The dispatch origin for this call must be Signed.

    Parameters:

    • proxy: The account that the caller would like to make a proxy.

    • proxy_type: The permissions allowed for this proxy account.

    • delay: The announcement period required of the initial proxy. Will generally be zero.

announce(real: MultiAddress, call_hash: H256)​

  • interface: api.tx.proxy.announce

  • summary: Publish the hash of a proxy-call that will be made in the future.

    This must be called some number of blocks before the corresponding proxy is attempted if the delay associated with the proxy relationship is greater than zero.

    No more than MaxPending announcements may be made at any one time.

    This will take a deposit of AnnouncementDepositFactor as well as AnnouncementDepositBase if there are no other pending announcements.

    The dispatch origin for this call must be Signed and a proxy of real.

    Parameters:

    • real: The account that the proxy will make a call on behalf of.

    • call_hash: The hash of the call to be made by the real account.

createPure(proxy_type: StagingKusamaRuntimeProxyType, delay: u32, index: u16)​

  • interface: api.tx.proxy.createPure

  • summary: Spawn a fresh new account that is guaranteed to be otherwise inaccessible, and initialize it with a proxy of proxy_type for origin sender.

    Requires a Signed origin.

    • proxy_type: The type of the proxy that the sender will be registered as over the new account. This will almost always be the most permissive ProxyType possible to allow for maximum flexibility.

    • index: A disambiguation index, in case this is called multiple times in the same transaction (e.g. with utility::batch). Unless you're using batch you probably just want to use 0.

    • delay: The announcement period required of the initial proxy. Will generally be zero.

      Fails with Duplicate if this has already been called in this transaction, from the same sender, with the same parameters.

      Fails if there are insufficient funds to pay for deposit.

killPure(spawner: MultiAddress, proxy_type: StagingKusamaRuntimeProxyType, index: u16, height: Compact<u32>, ext_index: Compact<u32>)​

  • interface: api.tx.proxy.killPure

  • summary: Removes a previously spawned pure proxy.

    WARNING: All access to this account will be lost. Any funds held in it will be inaccessible.

    Requires a Signed origin, and the sender account must have been created by a call to pure with corresponding parameters.

    • spawner: The account that originally called pure to create this account.

    • index: The disambiguation index originally passed to pure. Probably 0.

    • proxy_type: The proxy type originally passed to pure.

    • height: The height of the chain when the call to pure was processed.

    • ext_index: The extrinsic index in which the call to pure was processed.

      Fails with NoPermission in case the caller is not a previously created pure account whose pure call has corresponding parameters.

proxy(real: MultiAddress, force_proxy_type: Option<StagingKusamaRuntimeProxyType>, call: Call)​

  • interface: api.tx.proxy.proxy

  • summary: Dispatch the given call from an account that the sender is authorised for through add_proxy.

    The dispatch origin for this call must be Signed.

    Parameters:

    • real: The account that the proxy will make a call on behalf of.

    • force_proxy_type: Specify the exact proxy type to be used and checked for this call.

    • call: The call to be made by the real account.

proxyAnnounced(delegate: MultiAddress, real: MultiAddress, force_proxy_type: Option<StagingKusamaRuntimeProxyType>, call: Call)​

  • interface: api.tx.proxy.proxyAnnounced

  • summary: Dispatch the given call from an account that the sender is authorized for through add_proxy.

    Removes any corresponding announcement(s).

    The dispatch origin for this call must be Signed.

    Parameters:

    • real: The account that the proxy will make a call on behalf of.

    • force_proxy_type: Specify the exact proxy type to be used and checked for this call.

    • call: The call to be made by the real account.

rejectAnnouncement(delegate: MultiAddress, call_hash: H256)​

  • interface: api.tx.proxy.rejectAnnouncement

  • summary: Remove the given announcement of a delegate.

    May be called by a target (proxied) account to remove a call that one of their delegates (delegate) has announced they want to execute. The deposit is returned.

    The dispatch origin for this call must be Signed.

    Parameters:

    • delegate: The account that previously announced the call.

    • call_hash: The hash of the call to be made.

removeAnnouncement(real: MultiAddress, call_hash: H256)​

  • interface: api.tx.proxy.removeAnnouncement

  • summary: Remove a given announcement.

    May be called by a proxy account to remove a call they previously announced and return the deposit.

    The dispatch origin for this call must be Signed.

    Parameters:

    • real: The account that the proxy will make a call on behalf of.

    • call_hash: The hash of the call to be made by the real account.

removeProxies()​

  • interface: api.tx.proxy.removeProxies

  • summary: Unregister all proxy accounts for the sender.

    The dispatch origin for this call must be Signed.

    WARNING: This may be called on accounts created by pure, however if done, then the unreserved fees will be inaccessible. All access to this account will be lost.

removeProxy(delegate: MultiAddress, proxy_type: StagingKusamaRuntimeProxyType, delay: u32)​

  • interface: api.tx.proxy.removeProxy

  • summary: Unregister a proxy account for the sender.

    The dispatch origin for this call must be Signed.

    Parameters:

    • proxy: The account that the caller would like to remove as a proxy.

    • proxy_type: The permissions currently enabled for the removed proxy account.

recovery​

asRecovered(account: MultiAddress, call: Call)​

  • interface: api.tx.recovery.asRecovered

  • summary: Send a call through a recovered account.

    The dispatch origin for this call must be Signed and registered to be able to make calls on behalf of the recovered account.

    Parameters:

    • account: The recovered account you want to make a call on-behalf-of.

    • call: The call you want to make with the recovered account.

cancelRecovered(account: MultiAddress)​

  • interface: api.tx.recovery.cancelRecovered

  • summary: Cancel the ability to use as_recovered for account.

    The dispatch origin for this call must be Signed and registered to be able to make calls on behalf of the recovered account.

    Parameters:

    • account: The recovered account you are able to call on-behalf-of.

claimRecovery(account: MultiAddress)​

  • interface: api.tx.recovery.claimRecovery

  • summary: Allow a successful rescuer to claim their recovered account.

    The dispatch origin for this call must be Signed and must be a "rescuer" who has successfully completed the account recovery process: collected threshold or more vouches, waited delay_period blocks since initiation.

    Parameters:

    • account: The lost account that you want to claim has been successfully recovered by you.

closeRecovery(rescuer: MultiAddress)​

  • interface: api.tx.recovery.closeRecovery

  • summary: As the controller of a recoverable account, close an active recovery process for your account.

    Payment: By calling this function, the recoverable account will receive the recovery deposit RecoveryDeposit placed by the rescuer.

    The dispatch origin for this call must be Signed and must be a recoverable account with an active recovery process for it.

    Parameters:

    • rescuer: The account trying to rescue this recoverable account.

createRecovery(friends: Vec<AccountId32>, threshold: u16, delay_period: u32)​

  • interface: api.tx.recovery.createRecovery

  • summary: Create a recovery configuration for your account. This makes your account recoverable.

    Payment: ConfigDepositBase + FriendDepositFactor * #_of_friends balance will be reserved for storing the recovery configuration. This deposit is returned in full when the user calls remove_recovery.

    The dispatch origin for this call must be Signed.

    Parameters:

    • friends: A list of friends you trust to vouch for recovery attempts. Should be ordered and contain no duplicate values.

    • threshold: The number of friends that must vouch for a recovery attempt before the account can be recovered. Should be less than or equal to the length of the list of friends.

    • delay_period: The number of blocks after a recovery attempt is initialized that needs to pass before the account can be recovered.

initiateRecovery(account: MultiAddress)​

  • interface: api.tx.recovery.initiateRecovery

  • summary: Initiate the process for recovering a recoverable account.

    Payment: RecoveryDeposit balance will be reserved for initiating the recovery process. This deposit will always be repatriated to the account trying to be recovered. See close_recovery.

    The dispatch origin for this call must be Signed.

    Parameters:

    • account: The lost account that you want to recover. This account needs to be recoverable (i.e. have a recovery configuration).

removeRecovery()​

  • interface: api.tx.recovery.removeRecovery

  • summary: Remove the recovery process for your account. Recovered accounts are still accessible.

    NOTE: The user must make sure to call close_recovery on all active recovery attempts before calling this function else it will fail.

    Payment: By calling this function the recoverable account will unreserve their recovery configuration deposit. (ConfigDepositBase + FriendDepositFactor * #_of_friends)

    The dispatch origin for this call must be Signed and must be a recoverable account (i.e. has a recovery configuration).

setRecovered(lost: MultiAddress, rescuer: MultiAddress)​

  • interface: api.tx.recovery.setRecovered

  • summary: Allow ROOT to bypass the recovery process and set an a rescuer account for a lost account directly.

    The dispatch origin for this call must be ROOT.

    Parameters:

    • lost: The "lost account" to be recovered.

    • rescuer: The "rescuer account" which can call as the lost account.

vouchRecovery(lost: MultiAddress, rescuer: MultiAddress)​

  • interface: api.tx.recovery.vouchRecovery

  • summary: Allow a "friend" of a recoverable account to vouch for an active recovery process for that account.

    The dispatch origin for this call must be Signed and must be a "friend" for the recoverable account.

    Parameters:

    • lost: The lost account that you want to recover.

    • rescuer: The account trying to rescue the lost account that you want to vouch for.

      The combination of these two parameters must point to an active recovery process.

referenda​

cancel(index: u32)​

  • interface: api.tx.referenda.cancel

  • summary: Cancel an ongoing referendum.

    • origin: must be the CancelOrigin.

    • index: The index of the referendum to be cancelled.

      Emits Cancelled.

kill(index: u32)​

  • interface: api.tx.referenda.kill

  • summary: Cancel an ongoing referendum and slash the deposits.

    • origin: must be the KillOrigin.

    • index: The index of the referendum to be cancelled.

      Emits Killed and DepositSlashed.

nudgeReferendum(index: u32)​

  • interface: api.tx.referenda.nudgeReferendum

  • summary: Advance a referendum onto its next logical state. Only used internally.

    • origin: must be Root.

    • index: the referendum to be advanced.

oneFewerDeciding(track: u16)​

  • interface: api.tx.referenda.oneFewerDeciding

  • summary: Advance a track onto its next logical state. Only used internally.

    • origin: must be Root.

    • track: the track to be advanced.

      Action item for when there is now one fewer referendum in the deciding phase and the DecidingCount is not yet updated. This means that we should either:

    • begin deciding another referendum (and leave DecidingCount alone); or

    • decrement DecidingCount.

placeDecisionDeposit(index: u32)​

  • interface: api.tx.referenda.placeDecisionDeposit

  • summary: Post the Decision Deposit for a referendum.

    • origin: must be Signed and the account must have funds available for the referendum's track's Decision Deposit.

    • index: The index of the submitted referendum whose Decision Deposit is yet to be posted.

      Emits DecisionDepositPlaced.

refundDecisionDeposit(index: u32)​

  • interface: api.tx.referenda.refundDecisionDeposit

  • summary: Refund the Decision Deposit for a closed referendum back to the depositor.

    • origin: must be Signed or Root.

    • index: The index of a closed referendum whose Decision Deposit has not yet been refunded.

      Emits DecisionDepositRefunded.

refundSubmissionDeposit(index: u32)​

  • interface: api.tx.referenda.refundSubmissionDeposit

  • summary: Refund the Submission Deposit for a closed referendum back to the depositor.

    • origin: must be Signed or Root.

    • index: The index of a closed referendum whose Submission Deposit has not yet been refunded.

      Emits SubmissionDepositRefunded.

setMetadata(index: u32, maybe_hash: Option<H256>)​

  • interface: api.tx.referenda.setMetadata

  • summary: Set or clear metadata of a referendum.

    Parameters:

    • origin: Must be Signed by a creator of a referendum or by anyone to clear a metadata of a finished referendum.

    • index: The index of a referendum to set or clear metadata for.

    • maybe_hash: The hash of an on-chain stored preimage. None to clear a metadata.

submit(proposal_origin: StagingKusamaRuntimeOriginCaller, proposal: FrameSupportPreimagesBounded, enactment_moment: FrameSupportScheduleDispatchTime)​

  • interface: api.tx.referenda.submit

  • summary: Propose a referendum on a privileged action.

    • origin: must be SubmitOrigin and the account must have SubmissionDeposit funds available.

    • proposal_origin: The origin from which the proposal should be executed.

    • proposal: The proposal.

    • enactment_moment: The moment that the proposal should be enacted.

      Emits Submitted.

registrar​

addLock(para: u32)​

  • interface: api.tx.registrar.addLock

  • summary: Add a manager lock from a para. This will prevent the manager of a para to deregister or swap a para.

    Can be called by Root, the parachain, or the parachain manager if the parachain is unlocked.

deregister(id: u32)​

  • interface: api.tx.registrar.deregister

  • summary: Deregister a Para Id, freeing all data and returning any deposit.

    The caller must be Root, the para owner, or the para itself. The para must be an on-demand parachain.

forceRegister(who: AccountId32, deposit: u128, id: u32, genesis_head: Bytes, validation_code: Bytes)​

  • interface: api.tx.registrar.forceRegister

  • summary: Force the registration of a Para Id on the relay chain.

    This function must be called by a Root origin.

    The deposit taken can be specified for this registration. Any ParaId can be registered, including sub-1000 IDs which are System Parachains.

register(id: u32, genesis_head: Bytes, validation_code: Bytes)​

  • interface: api.tx.registrar.register

  • summary: Register head data and validation code for a reserved Para Id.

    Arguments​

    • origin: Must be called by a Signed origin.

    • id: The para ID. Must be owned/managed by the origin signing account.

    • genesis_head: The genesis head data of the parachain/thread.

    • validation_code: The initial validation code of the parachain/thread.

      Deposits/Fees The account with the originating signature must reserve a deposit.​

      The deposit is required to cover the costs associated with storing the genesis head data and the validation code. This accounts for the potential to store validation code of a size up to the max_code_size, as defined in the configuration pallet

      Anything already reserved previously for this para ID is accounted for.

      Events The Registered event is emitted in case of success.​

removeLock(para: u32)​

  • interface: api.tx.registrar.removeLock

  • summary: Remove a manager lock from a para. This will allow the manager of a previously locked para to deregister or swap a para without using governance.

    Can only be called by the Root origin or the parachain.

reserve()​

  • interface: api.tx.registrar.reserve

  • summary: Reserve a Para Id on the relay chain.

    This function will reserve a new Para Id to be owned/managed by the origin account. The origin account is able to register head data and validation code using register to create an on-demand parachain. Using the Slots pallet, an on-demand parachain can then be upgraded to a lease holding parachain.

    Arguments​

    • origin: Must be called by a Signed origin. Becomes the manager/owner of the new para ID.

      Deposits/Fees The origin must reserve a deposit of ParaDeposit for the registration.​

      Events The Reserved event is emitted in case of success, which provides the ID reserved for use.​

scheduleCodeUpgrade(para: u32, new_code: Bytes)​

  • interface: api.tx.registrar.scheduleCodeUpgrade

  • summary: Schedule a parachain upgrade.

    This will kick off a check of new_code by all validators. After the majority of the validators have reported on the validity of the code, the code will either be enacted or the upgrade will be rejected. If the code will be enacted, the current code of the parachain will be overwritten directly. This means that any PoV will be checked by this new code. The parachain itself will not be informed explicitly that the validation code has changed.

    Can be called by Root, the parachain, or the parachain manager if the parachain is unlocked.

setCurrentHead(para: u32, new_head: Bytes)​

  • interface: api.tx.registrar.setCurrentHead

  • summary: Set the parachain's current head.

    Can be called by Root, the parachain, or the parachain manager if the parachain is unlocked.

swap(id: u32, other: u32)​

  • interface: api.tx.registrar.swap

  • summary: Swap a lease holding parachain with another parachain, either on-demand or lease holding.

    The origin must be Root, the para owner, or the para itself.

    The swap will happen only if there is already an opposite swap pending. If there is not, the swap will be stored in the pending swaps map, ready for a later confirmatory swap.

    The ParaIds remain mapped to the same head data and code so external code can rely on ParaId to be a long-term identifier of a notional "parachain". However, their scheduling info (i.e. whether they're an on-demand parachain or lease holding parachain), auction information and the auction deposit are switched.

scheduler​

cancel(when: u32, index: u32)​

  • interface: api.tx.scheduler.cancel
  • summary: Cancel an anonymously scheduled task.

cancelNamed(id: [u8;32])​

  • interface: api.tx.scheduler.cancelNamed
  • summary: Cancel a named scheduled task.

cancelRetry(task: (u32,u32))​

  • interface: api.tx.scheduler.cancelRetry
  • summary: Removes the retry configuration of a task.

cancelRetryNamed(id: [u8;32])​

  • interface: api.tx.scheduler.cancelRetryNamed
  • summary: Cancel the retry configuration of a named task.

schedule(when: u32, maybe_periodic: Option<(u32,u32)>, priority: u8, call: Call)​

  • interface: api.tx.scheduler.schedule
  • summary: Anonymously schedule a task.

scheduleAfter(after: u32, maybe_periodic: Option<(u32,u32)>, priority: u8, call: Call)​

  • interface: api.tx.scheduler.scheduleAfter
  • summary: Anonymously schedule a task after a delay.

scheduleNamed(id: [u8;32], when: u32, maybe_periodic: Option<(u32,u32)>, priority: u8, call: Call)​

  • interface: api.tx.scheduler.scheduleNamed
  • summary: Schedule a named task.

scheduleNamedAfter(id: [u8;32], after: u32, maybe_periodic: Option<(u32,u32)>, priority: u8, call: Call)​

  • interface: api.tx.scheduler.scheduleNamedAfter
  • summary: Schedule a named task after a delay.

setRetry(task: (u32,u32), retries: u8, period: u32)​

  • interface: api.tx.scheduler.setRetry

  • summary: Set a retry configuration for a task so that, in case its scheduled run fails, it will be retried after period blocks, for a total amount of retries retries or until it succeeds.

    Tasks which need to be scheduled for a retry are still subject to weight metering and agenda space, same as a regular task. If a periodic task fails, it will be scheduled normally while the task is retrying.

    Tasks scheduled as a result of a retry for a periodic task are unnamed, non-periodic clones of the original task. Their retry configuration will be derived from the original task's configuration, but will have a lower value for remaining than the original total_retries.

setRetryNamed(id: [u8;32], retries: u8, period: u32)​

  • interface: api.tx.scheduler.setRetryNamed

  • summary: Set a retry configuration for a named task so that, in case its scheduled run fails, it will be retried after period blocks, for a total amount of retries retries or until it succeeds.

    Tasks which need to be scheduled for a retry are still subject to weight metering and agenda space, same as a regular task. If a periodic task fails, it will be scheduled normally while the task is retrying.

    Tasks scheduled as a result of a retry for a periodic task are unnamed, non-periodic clones of the original task. Their retry configuration will be derived from the original task's configuration, but will have a lower value for remaining than the original total_retries.

session​

purgeKeys()​

  • interface: api.tx.session.purgeKeys

  • summary: Removes any session key(s) of the function caller.

    This doesn't take effect until the next session.

    The dispatch origin of this function must be Signed and the account must be either be convertible to a validator ID using the chain's typical addressing system (this usually means being a controller account) or directly convertible into a validator ID (which usually means being a stash account).

    Complexity​

    • O(1) in number of key types. Actual cost depends on the number of length of T::Keys::key_ids() which is fixed.

setKeys(keys: StagingKusamaRuntimeSessionKeys, proof: Bytes)​

  • interface: api.tx.session.setKeys

  • summary: Sets the session key(s) of the function caller to keys. Allows an account to set its session key prior to becoming a validator. This doesn't take effect until the next session.

    The dispatch origin of this function must be signed.

    Complexity​

    • O(1). Actual cost depends on the number of length of T::Keys::key_ids() which is fixed.

slots​

clearAllLeases(para: u32)​

  • interface: api.tx.slots.clearAllLeases

  • summary: Clear all leases for a Para Id, refunding any deposits back to the original owners.

    The dispatch origin for this call must match T::ForceOrigin.

forceLease(para: u32, leaser: AccountId32, amount: u128, period_begin: u32, period_count: u32)​

  • interface: api.tx.slots.forceLease

  • summary: Just a connect into the lease_out call, in case Root wants to force some lease to happen independently of any other on-chain mechanism to use it.

    The dispatch origin for this call must match T::ForceOrigin.

triggerOnboard(para: u32)​

  • interface: api.tx.slots.triggerOnboard

  • summary: Try to onboard a parachain that has a lease for the current lease period.

    This function can be useful if there was some state issue with a para that should have onboarded, but was unable to. As long as they have a lease period, we can let them onboard from here.

    Origin must be signed, but can be called by anyone.

society​

bestowMembership(candidate: AccountId32)​

  • interface: api.tx.society.bestowMembership
  • summary: Transform an approved candidate into a member. Callable only by the Signed origin of the Founder, only after the period for voting has ended and only when the candidate is not clearly rejected.

bid(value: u128)​

  • interface: api.tx.society.bid

  • summary: A user outside of the society can make a bid for entry.

    Payment: The group's Candidate Deposit will be reserved for making a bid. It is returned when the bid becomes a member, or if the bid calls unbid.

    The dispatch origin for this call must be Signed.

    Parameters:

    • value: A one time payment the bid would like to receive when joining the society.

claimMembership()​

  • interface: api.tx.society.claimMembership
  • summary: Transform an approved candidate into a member. Callable only by the the candidate, and only after the period for voting has ended.

cleanupCandidacy(candidate: AccountId32, max: u32)​

  • interface: api.tx.society.cleanupCandidacy

  • summary: Remove up to max stale votes for the given candidate.

    May be called by any Signed origin, but only after the candidate's candidacy is ended.

cleanupChallenge(challenge_round: u32, max: u32)​

  • interface: api.tx.society.cleanupChallenge

  • summary: Remove up to max stale votes for the defender in the given challenge_round.

    May be called by any Signed origin, but only after the challenge round is ended.

defenderVote(approve: bool)​

  • interface: api.tx.society.defenderVote

  • summary: As a member, vote on the defender.

    The dispatch origin for this call must be Signed and a member.

    Parameters:

    • approve: A boolean which says if the candidate should be approved (true) or rejected (false).

dissolve()​

  • interface: api.tx.society.dissolve

  • summary: Dissolve the society and remove all members.

    The dispatch origin for this call must be Signed, and the signing account must be both the Founder and the Head. This implies that it may only be done when there is one member.

dropCandidate(candidate: AccountId32)​

  • interface: api.tx.society.dropCandidate

  • summary: Remove a candidate's failed application from the society. Callable by any signed origin but only at the end of the subsequent round and only for a candidate with more rejections than approvals.

    The bid deposit is lost and the voucher is banned.

foundSociety(founder: MultiAddress, max_members: u32, max_intake: u32, max_strikes: u32, candidate_deposit: u128, rules: Bytes)​

  • interface: api.tx.society.foundSociety

  • summary: Found the society.

    This is done as a discrete action in order to allow for the pallet to be included into a running chain and can only be done once.

    The dispatch origin for this call must be from the FounderSetOrigin.

    Parameters:

    • founder - The first member and head of the newly founded society.

    • max_members - The initial max number of members for the society.

    • max_intake - The maximum number of candidates per intake period.

    • max_strikes: The maximum number of strikes a member may get before they become suspended and may only be reinstated by the founder.

    • candidate_deposit: The deposit required to make a bid for membership of the group.

    • rules - The rules of this society concerning membership.

      Complexity: O(1)

judgeSuspendedMember(who: MultiAddress, forgive: bool)​

  • interface: api.tx.society.judgeSuspendedMember

  • summary: Allow suspension judgement origin to make judgement on a suspended member.

    If a suspended member is forgiven, we simply add them back as a member, not affecting any of the existing storage items for that member.

    If a suspended member is rejected, remove all associated storage items, including their payouts, and remove any vouched bids they currently have.

    The dispatch origin for this call must be Signed from the Founder.

    Parameters:

    • who - The suspended member to be judged.

    • forgive - A boolean representing whether the suspension judgement origin forgives (true) or rejects (false) a suspended member.

kickCandidate(candidate: AccountId32)​

  • interface: api.tx.society.kickCandidate

  • summary: Remove the candidate's application from the society. Callable only by the Signed origin of the Founder, only after the period for voting has ended, and only when they do not have a clear approval.

    Any bid deposit is lost and voucher is banned.

payout()​

  • interface: api.tx.society.payout

  • summary: Transfer the first matured payout for the sender and remove it from the records.

    NOTE: This extrinsic needs to be called multiple times to claim multiple matured payouts.

    Payment: The member will receive a payment equal to their first matured payout to their free balance.

    The dispatch origin for this call must be Signed and a member with payouts remaining.

punishSkeptic()​

  • interface: api.tx.society.punishSkeptic
  • summary: Punish the skeptic with a strike if they did not vote on a candidate. Callable by the candidate.

resignCandidacy()​

  • interface: api.tx.society.resignCandidacy

  • summary: Remove the candidate's application from the society. Callable only by the candidate.

    Any bid deposit is lost and voucher is banned.

setParameters(max_members: u32, max_intake: u32, max_strikes: u32, candidate_deposit: u128)​

  • interface: api.tx.society.setParameters

  • summary: Change the maximum number of members in society and the maximum number of new candidates in a single intake period.

    The dispatch origin for this call must be Signed by the Founder.

    Parameters:

    • max_members - The maximum number of members for the society. This must be no less than the current number of members.

    • max_intake - The maximum number of candidates per intake period.

    • max_strikes: The maximum number of strikes a member may get before they become suspended and may only be reinstated by the founder.

    • candidate_deposit: The deposit required to make a bid for membership of the group.

unbid()​

  • interface: api.tx.society.unbid

  • summary: A bidder can remove their bid for entry into society. By doing so, they will have their candidate deposit returned or they will unvouch their voucher.

    Payment: The bid deposit is unreserved if the user made a bid.

    The dispatch origin for this call must be Signed and a bidder.

unvouch()​

  • interface: api.tx.society.unvouch

  • summary: As a vouching member, unvouch a bid. This only works while vouched user is only a bidder (and not a candidate).

    The dispatch origin for this call must be Signed and a vouching member.

    Parameters:

    • pos: Position in the Bids vector of the bid who should be unvouched.

vote(candidate: MultiAddress, approve: bool)​

  • interface: api.tx.society.vote

  • summary: As a member, vote on a candidate.

    The dispatch origin for this call must be Signed and a member.

    Parameters:

    • candidate: The candidate that the member would like to bid on.

    • approve: A boolean which says if the candidate should be approved (true) or rejected (false).

vouch(who: MultiAddress, value: u128, tip: u128)​

  • interface: api.tx.society.vouch

  • summary: As a member, vouch for someone to join society by placing a bid on their behalf.

    There is no deposit required to vouch for a new bid, but a member can only vouch for one bid at a time. If the bid becomes a suspended candidate and ultimately rejected by the suspension judgement origin, the member will be banned from vouching again.

    As a vouching member, you can claim a tip if the candidate is accepted. This tip will be paid as a portion of the reward the member will receive for joining the society.

    The dispatch origin for this call must be Signed and a member.

    Parameters:

    • who: The user who you would like to vouch for.

    • value: The total reward to be paid between you and the candidate if they become a member in the society.

    • tip: Your cut of the total value payout when the candidate is inducted into the society. Tips larger than value will be saturated upon payout.

waiveRepay(amount: u128)​

  • interface: api.tx.society.waiveRepay
  • summary: Repay the payment previously given to the member with the signed origin, remove any pending payments, and elevate them from rank 0 to rank 1.

staking​

bond(value: Compact<u128>, payee: PalletStakingRewardDestination)​

  • interface: api.tx.staking.bond

  • summary: Take the origin account as a stash and lock up value of its balance. controller will be the account that controls it.

    value must be more than the minimum_balance specified by T::Currency.

    The dispatch origin for this call must be Signed by the stash account.

    Emits Bonded. #### Complexity

    • Independent of the arguments. Moderate complexity.

    • O(1).

    • Three extra DB entries.

      NOTE: Two of the storage writes (Self::bonded, Self::payee) are never cleaned unless the origin falls below existential deposit (or equal to 0) and gets removed as dust.

bondExtra(max_additional: Compact<u128>)​

  • interface: api.tx.staking.bondExtra

  • summary: Add some extra amount that have appeared in the stash free_balance into the balance up for staking.

    The dispatch origin for this call must be Signed by the stash, not the controller.

    Use this if there are additional funds in your stash account that you wish to bond. Unlike bond or unbond this function does not impose any limitation on the amount that can be added.

    Emits Bonded.

    Complexity​

    • Independent of the arguments. Insignificant complexity.

    • O(1).

cancelDeferredSlash(era: u32, slash_indices: Vec<u32>)​

  • interface: api.tx.staking.cancelDeferredSlash

  • summary: Cancel enactment of a deferred slash.

    Can be called by the T::AdminOrigin.

    Parameters: era and indices of the slashes for that era to kill.

chill()​

  • interface: api.tx.staking.chill

  • summary: Declare no desire to either validate or nominate.

    Effects will be felt at the beginning of the next era.

    The dispatch origin for this call must be Signed by the controller, not the stash.

    Complexity​

    • Independent of the arguments. Insignificant complexity.

    • Contains one read.

    • Writes are limited to the origin account key.

chillOther(stash: AccountId32)​

  • interface: api.tx.staking.chillOther

  • summary: Declare a controller to stop participating as either a validator or nominator.

    Effects will be felt at the beginning of the next era.

    The dispatch origin for this call must be Signed, but can be called by anyone.

    If the caller is the same as the controller being targeted, then no further checks are enforced, and this function behaves just like chill.

    If the caller is different than the controller being targeted, the following conditions must be met:

    • controller must belong to a nominator who has become non-decodable,

      Or:

    • A ChillThreshold must be set and checked which defines how close to the max nominators or validators we must reach before users can start chilling one-another.

    • A MaxNominatorCount and MaxValidatorCount must be set which is used to determine how close we are to the threshold.

    • A MinNominatorBond and MinValidatorBond must be set and checked, which determines if this is a person that should be chilled because they have not met the threshold bond required.

      This can be helpful if bond requirements are updated, and we need to remove old users who do not satisfy these requirements.

deprecateControllerBatch(controllers: Vec<AccountId32>)​

  • interface: api.tx.staking.deprecateControllerBatch

  • summary: Updates a batch of controller accounts to their corresponding stash account if they are not the same. Ignores any controller accounts that do not exist, and does not operate if the stash and controller are already the same.

    Effects will be felt instantly (as soon as this function is completed successfully).

    The dispatch origin must be T::AdminOrigin.

forceApplyMinCommission(validator_stash: AccountId32)​

  • interface: api.tx.staking.forceApplyMinCommission
  • summary: Force a validator to have at least the minimum commission. This will not affect a validator who already has a commission greater than or equal to the minimum. Any account can call this.

forceNewEra()​

  • interface: api.tx.staking.forceNewEra

  • summary: Force there to be a new era at the end of the next session. After this, it will be reset to normal (non-forced) behaviour.

    The dispatch origin must be Root.

    Warning​

    The election process starts multiple blocks before the end of the era. If this is called just before a new era is triggered, the election process may not have enough blocks to get a result.

    Complexity​

    • No arguments.

    • Weight: O(1)

forceNewEraAlways()​

  • interface: api.tx.staking.forceNewEraAlways

  • summary: Force there to be a new era at the end of sessions indefinitely.

    The dispatch origin must be Root.

    Warning​

    The election process starts multiple blocks before the end of the era. If this is called just before a new era is triggered, the election process may not have enough blocks to get a result.

forceNoEras()​

  • interface: api.tx.staking.forceNoEras

  • summary: Force there to be no new eras indefinitely.

    The dispatch origin must be Root.

    Warning​

    The election process starts multiple blocks before the end of the era. Thus the election process may be ongoing when this is called. In this case the election will continue until the next era is triggered.

    Complexity​

    • No arguments.

    • Weight: O(1)

forceUnstake(stash: AccountId32, num_slashing_spans: u32)​

  • interface: api.tx.staking.forceUnstake

  • summary: Force a current staker to become completely unstaked, immediately.

    The dispatch origin must be Root.

    Parameters​

    • num_slashing_spans: Refer to comments on [Call::withdraw_unbonded] for more details.

increaseValidatorCount(additional: Compact<u32>)​

  • interface: api.tx.staking.increaseValidatorCount

  • summary: Increments the ideal number of validators up to maximum of ElectionProviderBase::MaxWinners.

    The dispatch origin must be Root.

    Complexity Same as [Self::set_validator_count].​

kick(who: Vec<MultiAddress>)​

  • interface: api.tx.staking.kick

  • summary: Remove the given nominations from the calling validator.

    Effects will be felt at the beginning of the next era.

    The dispatch origin for this call must be Signed by the controller, not the stash.

    • who: A list of nominator stash accounts who are nominating this validator which should no longer be nominating this validator.

      Note: Making this call only makes sense if you first set the validator preferences to block any further nominations.

nominate(targets: Vec<MultiAddress>)​

  • interface: api.tx.staking.nominate

  • summary: Declare the desire to nominate targets for the origin controller.

    Effects will be felt at the beginning of the next era.

    The dispatch origin for this call must be Signed by the controller, not the stash.

    Complexity​

    • The transaction's complexity is proportional to the size of targets (N) which is capped at CompactAssignments::LIMIT (T::MaxNominations).

    • Both the reads and writes follow a similar pattern.

payoutStakers(validator_stash: AccountId32, era: u32)​

  • interface: api.tx.staking.payoutStakers

  • summary: Pay out next page of the stakers behind a validator for the given era.

    • validator_stash is the stash account of the validator.

    • era may be any era between [current_era - history_depth; current_era].

      The origin of this call must be Signed. Any account can call this function, even if it is not one of the stakers.

      The reward payout could be paged in case there are too many nominators backing the validator_stash. This call will payout unpaid pages in an ascending order. To claim a specific page, use payout_stakers_by_page.`

      If all pages are claimed, it returns an error InvalidPage.

payoutStakersByPage(validator_stash: AccountId32, era: u32, page: u32)​

  • interface: api.tx.staking.payoutStakersByPage

  • summary: Pay out a page of the stakers behind a validator for the given era and page.

    • validator_stash is the stash account of the validator.

    • era may be any era between [current_era - history_depth; current_era].

    • page is the page index of nominators to pay out with value between 0 and num_nominators / T::MaxExposurePageSize.

      The origin of this call must be Signed. Any account can call this function, even if it is not one of the stakers.

      If a validator has more than [Config::MaxExposurePageSize] nominators backing them, then the list of nominators is paged, with each page being capped at [Config::MaxExposurePageSize.] If a validator has more than one page of nominators, the call needs to be made for each page separately in order for all the nominators backing a validator to receive the reward. The nominators are not sorted across pages and so it should not be assumed the highest staker would be on the topmost page and vice versa. If rewards are not claimed in [Config::HistoryDepth] eras, they are lost.

reapStash(stash: AccountId32, num_slashing_spans: u32)​

  • interface: api.tx.staking.reapStash

  • summary: Remove all data structures concerning a staker/stash once it is at a state where it can be considered dust in the staking system. The requirements are:

    1. the total_balance of the stash is below existential deposit. 2. or, the ledger.total of the stash is below existential deposit. 3. or, existential deposit is zero and either total_balance or ledger.total is zero.

      The former can happen in cases like a slash; the latter when a fully unbonded account is still receiving staking rewards in RewardDestination::Staked.

      It can be called by anyone, as long as stash meets the above requirements.

      Refunds the transaction fees upon successful execution.

      Parameters​

    • num_slashing_spans: Refer to comments on [Call::withdraw_unbonded] for more details.

rebond(value: Compact<u128>)​

  • interface: api.tx.staking.rebond

  • summary: Rebond a portion of the stash scheduled to be unlocked.

    The dispatch origin must be signed by the controller.

    Complexity​

    • Time complexity: O(L), where L is unlocking chunks

    • Bounded by MaxUnlockingChunks.

restoreLedger(stash: AccountId32, maybe_controller: Option<AccountId32>, maybe_total: Option<u128>, maybe_unlocking: Option<Vec<PalletStakingUnlockChunk>>)​

  • interface: api.tx.staking.restoreLedger

  • summary: Restores the state of a ledger which is in an inconsistent state.

    The requirements to restore a ledger are the following:

    • The stash is bonded; or

    • The stash is not bonded but it has a staking lock left behind; or

    • If the stash has an associated ledger and its state is inconsistent; or

    • If the ledger is not corrupted but its staking lock is out of sync.

      The maybe_* input parameters will overwrite the corresponding data and metadata of the ledger associated with the stash. If the input parameters are not set, the ledger will be reset values from on-chain state.

scaleValidatorCount(factor: Percent)​

  • interface: api.tx.staking.scaleValidatorCount

  • summary: Scale up the ideal number of validators by a factor up to maximum of ElectionProviderBase::MaxWinners.

    The dispatch origin must be Root.

    Complexity Same as [Self::set_validator_count].​

setController()​

  • interface: api.tx.staking.setController

  • summary: (Re-)sets the controller of a stash to the stash itself. This function previously accepted a controller argument to set the controller to an account other than the stash itself. This functionality has now been removed, now only setting the controller to the stash, if it is not already.

    Effects will be felt instantly (as soon as this function is completed successfully).

    The dispatch origin for this call must be Signed by the stash, not the controller.

    Complexity O(1)​

    • Independent of the arguments. Insignificant complexity.

    • Contains a limited number of reads.

    • Writes are limited to the origin account key.

setInvulnerables(invulnerables: Vec<AccountId32>)​

  • interface: api.tx.staking.setInvulnerables

  • summary: Set the validators who cannot be slashed (if any).

    The dispatch origin must be Root.

setMinCommission(new: Perbill)​

  • interface: api.tx.staking.setMinCommission

  • summary: Sets the minimum amount of commission that each validators must maintain.

    This call has lower privilege requirements than set_staking_config and can be called by the T::AdminOrigin. Root can always call this.

setPayee(payee: PalletStakingRewardDestination)​

  • interface: api.tx.staking.setPayee

  • summary: (Re-)set the payment target for a controller.

    Effects will be felt instantly (as soon as this function is completed successfully).

    The dispatch origin for this call must be Signed by the controller, not the stash.

    Complexity​

    • O(1)

    • Independent of the arguments. Insignificant complexity.

    • Contains a limited number of reads.

    • Writes are limited to the origin account key.

setStakingConfigs(min_nominator_bond: PalletStakingPalletConfigOpU128, min_validator_bond: PalletStakingPalletConfigOpU128, max_nominator_count: PalletStakingPalletConfigOpU32, max_validator_count: PalletStakingPalletConfigOpU32, chill_threshold: PalletStakingPalletConfigOpPercent, min_commission: PalletStakingPalletConfigOpPerbill, max_staked_rewards: PalletStakingPalletConfigOpPercent)​

  • interface: api.tx.staking.setStakingConfigs

  • summary: Update the various staking configurations .

    • min_nominator_bond: The minimum active bond needed to be a nominator.

    • min_validator_bond: The minimum active bond needed to be a validator.

    • max_nominator_count: The max number of users who can be a nominator at once. When set to None, no limit is enforced.

    • max_validator_count: The max number of users who can be a validator at once. When set to None, no limit is enforced.

    • chill_threshold: The ratio of max_nominator_count or max_validator_count which should be filled in order for the chill_other transaction to work.

    • min_commission: The minimum amount of commission that each validators must maintain. This is checked only upon calling validate. Existing validators are not affected.

      RuntimeOrigin must be Root to call this function.

      NOTE: Existing nominators and validators will not be affected by this update. to kick people under the new limits, chill_other should be called.

setValidatorCount(new: Compact<u32>)​

  • interface: api.tx.staking.setValidatorCount

  • summary: Sets the ideal number of validators.

    The dispatch origin must be Root.

    Complexity O(1)​

unbond(value: Compact<u128>)​

  • interface: api.tx.staking.unbond

  • summary: Schedule a portion of the stash to be unlocked ready for transfer out after the bond period ends. If this leaves an amount actively bonded less than T::Currency::minimum_balance(), then it is increased to the full amount.

    The dispatch origin for this call must be Signed by the controller, not the stash.

    Once the unlock period is done, you can call withdraw_unbonded to actually move the funds out of management ready for transfer.

    No more than a limited number of unlocking chunks (see MaxUnlockingChunks) can co-exists at the same time. If there are no unlocking chunks slots available [Call::withdraw_unbonded] is called to remove some of the chunks (if possible).

    If a user encounters the InsufficientBond error when calling this extrinsic, they should call chill first in order to free up their bonded funds.

    Emits Unbonded.

    See also [Call::withdraw_unbonded].

updatePayee(controller: AccountId32)​

  • interface: api.tx.staking.updatePayee

  • summary: Migrates an account's RewardDestination::Controller to RewardDestination::Account(controller).

    Effects will be felt instantly (as soon as this function is completed successfully).

    This will waive the transaction fee if the payee is successfully migrated.

validate(prefs: PalletStakingValidatorPrefs)​

  • interface: api.tx.staking.validate

  • summary: Declare the desire to validate for the origin controller.

    Effects will be felt at the beginning of the next era.

    The dispatch origin for this call must be Signed by the controller, not the stash.

withdrawUnbonded(num_slashing_spans: u32)​

  • interface: api.tx.staking.withdrawUnbonded

  • summary: Remove any unlocked chunks from the unlocking queue from our management.

    This essentially frees up that balance to be used by the stash account to do whatever it wants.

    The dispatch origin for this call must be Signed by the controller.

    Emits Withdrawn.

    See also [Call::unbond].

    Parameters​

    • num_slashing_spans indicates the number of metadata slashing spans to clear when this call results in a complete removal of all the data related to the stash account. In this case, the num_slashing_spans must be larger or equal to the number of slashing spans associated with the stash account in the [SlashingSpans] storage type, otherwise the call will fail. The call weight is directly proportional to num_slashing_spans.

      Complexity O(S) where S is the number of slashing spans to remove NOTE: Weight annotation is the kill scenario, we refund otherwise.​

system​

applyAuthorizedUpgrade(code: Bytes)​

  • interface: api.tx.system.applyAuthorizedUpgrade

  • summary: Provide the preimage (runtime binary) code for an upgrade that has been authorized.

    If the authorization required a version check, this call will ensure the spec name remains unchanged and that the spec version has increased.

    Depending on the runtime's OnSetCode configuration, this function may directly apply the new code in the same block or attempt to schedule the upgrade.

    All origins are allowed.

authorizeUpgrade(code_hash: H256)​

  • interface: api.tx.system.authorizeUpgrade

  • summary: Authorize an upgrade to a given code_hash for the runtime. The runtime can be supplied later.

    This call requires Root origin.

authorizeUpgradeWithoutChecks(code_hash: H256)​

  • interface: api.tx.system.authorizeUpgradeWithoutChecks

  • summary: Authorize an upgrade to a given code_hash for the runtime. The runtime can be supplied later.

    WARNING: This authorizes an upgrade that will take place without any safety checks, for example that the spec name remains the same and that the version number increases. Not recommended for normal use. Use authorize_upgrade instead.

    This call requires Root origin.

killPrefix(prefix: Bytes, subkeys: u32)​

  • interface: api.tx.system.killPrefix

  • summary: Kill all storage items with a key that starts with the given prefix.

    NOTE: We rely on the Root origin to provide us the number of subkeys under the prefix we are removing to accurately calculate the weight of this function.

killStorage(keys: Vec<Bytes>)​

  • interface: api.tx.system.killStorage
  • summary: Kill some items from storage.

remark(remark: Bytes)​

  • interface: api.tx.system.remark

  • summary: Make some on-chain remark.

    Can be executed by every origin.

remarkWithEvent(remark: Bytes)​

  • interface: api.tx.system.remarkWithEvent
  • summary: Make some on-chain remark and emit event.

setCode(code: Bytes)​

  • interface: api.tx.system.setCode
  • summary: Set the new runtime code.

setCodeWithoutChecks(code: Bytes)​

  • interface: api.tx.system.setCodeWithoutChecks

  • summary: Set the new runtime code without doing any checks of the given code.

    Note that runtime upgrades will not run if this is called with a not-increasing spec version!

setHeapPages(pages: u64)​

  • interface: api.tx.system.setHeapPages
  • summary: Set the number of pages in the WebAssembly environment's heap.

setStorage(items: Vec<(Bytes,Bytes)>)​

  • interface: api.tx.system.setStorage
  • summary: Set some items of storage.

timestamp​

set(now: Compact<u64>)​

  • interface: api.tx.timestamp.set

  • summary: Set the current time.

    This call should be invoked exactly once per block. It will panic at the finalization phase, if this call hasn't been invoked by that time.

    The timestamp should be greater than the previous one by the amount specified by [Config::MinimumPeriod].

    The dispatch origin for this call must be None.

    This dispatch class is Mandatory to ensure it gets executed in the block. Be aware that changing the complexity of this call could result exhausting the resources in a block to execute any other calls.

    Complexity​

    • O(1) (Note that implementations of OnTimestampSet must also be O(1))

    • 1 storage read and 1 storage mutation (codec O(1) because of DidUpdate::take in on_finalize)

    • 1 event handler on_timestamp_set. Must be O(1).

treasury​

checkStatus(index: u32)​

  • interface: api.tx.treasury.checkStatus

  • summary: Check the status of the spend and remove it from the storage if processed.

    Dispatch Origin​

    Must be signed.

    Details​

    The status check is a prerequisite for retrying a failed payout. If a spend has either succeeded or expired, it is removed from the storage by this function. In such instances, transaction fees are refunded.

    Parameters​

    • index: The spend index.

      Events​

      Emits [Event::PaymentFailed] if the spend payout has failed. Emits [Event::SpendProcessed] if the spend payout has succeed.

payout(index: u32)​

  • interface: api.tx.treasury.payout

  • summary: Claim a spend.

    Dispatch Origin​

    Must be signed

    Details​

    Spends must be claimed within some temporal bounds. A spend may be claimed within one [Config::PayoutPeriod] from the valid_from block. In case of a payout failure, the spend status must be updated with the check_status dispatchable before retrying with the current function.

    Parameters​

    • index: The spend index.

      Events​

      Emits [Event::Paid] if successful.

removeApproval(proposal_id: Compact<u32>)​

  • interface: api.tx.treasury.removeApproval

  • summary: Force a previously approved proposal to be removed from the approval queue.

    Dispatch Origin​

    Must be [Config::RejectOrigin].

    Details​

    The original deposit will no longer be returned.

    Parameters​

    • proposal_id: The index of a proposal

      Complexity​

    • O(A) where A is the number of approvals

      Errors​

    • [Error::ProposalNotApproved]: The proposal_id supplied was not found in the approval queue, i.e., the proposal has not been approved. This could also mean the proposal does not exist altogether, thus there is no way it would have been approved in the first place.

spend(asset_kind: PolkadotRuntimeCommonImplsVersionedLocatableAsset, amount: Compact<u128>, beneficiary: XcmVersionedLocation, valid_from: Option<u32>)​

  • interface: api.tx.treasury.spend

  • summary: Propose and approve a spend of treasury funds.

    Dispatch Origin​

    Must be [Config::SpendOrigin] with the Success value being at least amount of asset_kind in the native asset. The amount of asset_kind is converted for assertion using the [Config::BalanceConverter].

    Details​

    Create an approved spend for transferring a specific amount of asset_kind to a designated beneficiary. The spend must be claimed using the payout dispatchable within the [Config::PayoutPeriod].

    Parameters​

    • asset_kind: An indicator of the specific asset class to be spent.

    • amount: The amount to be transferred from the treasury to the beneficiary.

    • beneficiary: The beneficiary of the spend.

    • valid_from: The block number from which the spend can be claimed. It can refer to the past if the resulting spend has not yet expired according to the [Config::PayoutPeriod]. If None, the spend can be claimed immediately after approval.

      Events​

      Emits [Event::AssetSpendApproved] if successful.

spendLocal(amount: Compact<u128>, beneficiary: MultiAddress)​

  • interface: api.tx.treasury.spendLocal

  • summary: Propose and approve a spend of treasury funds.

    Dispatch Origin​

    Must be [Config::SpendOrigin] with the Success value being at least amount.

    Details NOTE: For record-keeping purposes, the proposer is deemed to be equivalent to the beneficiary.​

    Parameters​

    • amount: The amount to be transferred from the treasury to the beneficiary.

    • beneficiary: The destination account for the transfer.

      Events​

      Emits [Event::SpendApproved] if successful.

voidSpend(index: u32)​

  • interface: api.tx.treasury.voidSpend

  • summary: Void previously approved spend.

    Dispatch Origin​

    Must be [Config::RejectOrigin].

    Details​

    A spend void is only possible if the payout has not been attempted yet.

    Parameters​

    • index: The spend index.

      Events​

      Emits [Event::AssetSpendVoided] if successful.

utility​

asDerivative(index: u16, call: Call)​

  • interface: api.tx.utility.asDerivative

  • summary: Send a call through an indexed pseudonym of the sender.

    Filter from origin are passed along. The call will be dispatched with an origin which use the same filter as the origin of this call.

    NOTE: If you need to ensure that any account-based filtering is not honored (i.e. because you expect proxy to have been used prior in the call stack and you do not want the call restrictions to apply to any sub-accounts), then use as_multi_threshold_1 in the Multisig pallet instead.

    NOTE: Prior to version *12, this was called as_limited_sub.

    The dispatch origin for this call must be Signed.

batch(calls: Vec<Call>)​

  • interface: api.tx.utility.batch

  • summary: Send a batch of dispatch calls.

    May be called from any origin except None.

    • calls: The calls to be dispatched from the same origin. The number of call must not exceed the constant: batched_calls_limit (available in constant metadata).

      If origin is root then the calls are dispatched without checking origin filter. (This includes bypassing frame_system::Config::BaseCallFilter).

      Complexity​

    • O(C) where C is the number of calls to be batched.

      This will return Ok in all circumstances. To determine the success of the batch, an event is deposited. If a call failed and the batch was interrupted, then the BatchInterrupted event is deposited, along with the number of successful calls made and the error of the failed call. If all were successful, then the BatchCompleted event is deposited.

batchAll(calls: Vec<Call>)​

  • interface: api.tx.utility.batchAll

  • summary: Send a batch of dispatch calls and atomically execute them. The whole transaction will rollback and fail if any of the calls failed.

    May be called from any origin except None.

    • calls: The calls to be dispatched from the same origin. The number of call must not exceed the constant: batched_calls_limit (available in constant metadata).

      If origin is root then the calls are dispatched without checking origin filter. (This includes bypassing frame_system::Config::BaseCallFilter).

      Complexity​

    • O(C) where C is the number of calls to be batched.

dispatchAs(as_origin: StagingKusamaRuntimeOriginCaller, call: Call)​

  • interface: api.tx.utility.dispatchAs

  • summary: Dispatches a function call with a provided origin.

    The dispatch origin for this call must be Root.

    Complexity​

    • O(1).

forceBatch(calls: Vec<Call>)​

  • interface: api.tx.utility.forceBatch

  • summary: Send a batch of dispatch calls. Unlike batch, it allows errors and won't interrupt.

    May be called from any origin except None.

    • calls: The calls to be dispatched from the same origin. The number of call must not exceed the constant: batched_calls_limit (available in constant metadata).

      If origin is root then the calls are dispatch without checking origin filter. (This includes bypassing frame_system::Config::BaseCallFilter).

      Complexity​

    • O(C) where C is the number of calls to be batched.

withWeight(call: Call, weight: SpWeightsWeightV2Weight)​

  • interface: api.tx.utility.withWeight

  • summary: Dispatch a function call with a specified weight.

    This function does not check the weight of the call, and instead allows the Root origin to specify the weight of the call.

    The dispatch origin for this call must be Root.

vesting​

forceRemoveVestingSchedule(target: MultiAddress, schedule_index: u32)​

  • interface: api.tx.vesting.forceRemoveVestingSchedule

  • summary: Force remove a vesting schedule

    The dispatch origin for this call must be Root.

    • target: An account that has a vesting schedule

    • schedule_index: The vesting schedule index that should be removed

forceVestedTransfer(source: MultiAddress, target: MultiAddress, schedule: PalletVestingVestingInfo)​

  • interface: api.tx.vesting.forceVestedTransfer

  • summary: Force a vested transfer.

    The dispatch origin for this call must be Root.

    • source: The account whose funds should be transferred.

    • target: The account that should be transferred the vested funds.

    • schedule: The vesting schedule attached to the transfer.

      Emits VestingCreated.

      NOTE: This will unlock all schedules through the current block.

      Complexity​

    • O(1).

mergeSchedules(schedule1_index: u32, schedule2_index: u32)​

  • interface: api.tx.vesting.mergeSchedules

  • summary: Merge two vesting schedules together, creating a new vesting schedule that unlocks over the highest possible start and end blocks. If both schedules have already started the current block will be used as the schedule start; with the caveat that if one schedule is finished by the current block, the other will be treated as the new merged schedule, unmodified.

    NOTE: If schedule1_index == schedule2_index this is a no-op. NOTE: This will unlock all schedules through the current block prior to merging. NOTE: If both schedules have ended by the current block, no new schedule will be created and both will be removed.

    Merged schedule attributes:

    • starting_block: MAX(schedule1.starting_block, scheduled2.starting_block, current_block).

    • ending_block: MAX(schedule1.ending_block, schedule2.ending_block).

    • locked: schedule1.locked_at(current_block) + schedule2.locked_at(current_block).

      The dispatch origin for this call must be Signed.

    • schedule1_index: index of the first schedule to merge.

    • schedule2_index: index of the second schedule to merge.

vest()​

  • interface: api.tx.vesting.vest

  • summary: Unlock any vested funds of the sender account.

    The dispatch origin for this call must be Signed and the sender must have funds still locked under this pallet.

    Emits either VestingCompleted or VestingUpdated.

    Complexity​

    • O(1).

vestOther(target: MultiAddress)​

  • interface: api.tx.vesting.vestOther

  • summary: Unlock any vested funds of a target account.

    The dispatch origin for this call must be Signed.

    • target: The account whose vested funds should be unlocked. Must have funds still locked under this pallet.

      Emits either VestingCompleted or VestingUpdated.

      Complexity​

    • O(1).

vestedTransfer(target: MultiAddress, schedule: PalletVestingVestingInfo)​

  • interface: api.tx.vesting.vestedTransfer

  • summary: Create a vested transfer.

    The dispatch origin for this call must be Signed.

    • target: The account receiving the vested funds.

    • schedule: The vesting schedule attached to the transfer.

      Emits VestingCreated.

      NOTE: This will unlock all schedules through the current block.

      Complexity​

    • O(1).

voterList​

putInFrontOf(lighter: MultiAddress)​

  • interface: api.tx.voterList.putInFrontOf

  • summary: Move the caller's Id directly in front of lighter.

    The dispatch origin for this call must be Signed and can only be called by the Id of the account going in front of lighter. Fee is payed by the origin under all circumstances.

    Only works if:

    • both nodes are within the same bag,

    • and origin has a greater Score than lighter.

putInFrontOfOther(heavier: MultiAddress, lighter: MultiAddress)​

  • interface: api.tx.voterList.putInFrontOfOther

  • summary: Same as [Pallet::put_in_front_of], but it can be called by anyone.

    Fee is paid by the origin under all circumstances.

rebag(dislocated: MultiAddress)​

  • interface: api.tx.voterList.rebag

  • summary: Declare that some dislocated account has, through rewards or penalties, sufficiently changed its score that it should properly fall into a different bag than its current one.

    Anyone can call this function about any potentially dislocated account.

    Will always update the stored score of dislocated to the correct score, based on ScoreProvider.

    If dislocated does not exists, it returns an error.

whitelist​

dispatchWhitelistedCall(call_hash: H256, call_encoded_len: u32, call_weight_witness: SpWeightsWeightV2Weight)​

  • interface: api.tx.whitelist.dispatchWhitelistedCall

dispatchWhitelistedCallWithPreimage(call: Call)​

  • interface: api.tx.whitelist.dispatchWhitelistedCallWithPreimage

removeWhitelistedCall(call_hash: H256)​

  • interface: api.tx.whitelist.removeWhitelistedCall

whitelistCall(call_hash: H256)​

  • interface: api.tx.whitelist.whitelistCall

xcmPallet​

claimAssets(assets: XcmVersionedAssets, beneficiary: XcmVersionedLocation)​

  • interface: api.tx.xcmPallet.claimAssets

  • summary: Claims assets trapped on this pallet because of leftover assets during XCM execution.

    • origin: Anyone can call this extrinsic.

    • assets: The exact assets that were trapped. Use the version to specify what version was the latest when they were trapped.

    • beneficiary: The location/account where the claimed assets will be deposited.

execute(message: XcmVersionedXcm, max_weight: SpWeightsWeightV2Weight)​

  • interface: api.tx.xcmPallet.execute

  • summary: Execute an XCM message from a local, signed, origin.

    An event is deposited indicating whether msg could be executed completely or only partially.

    No more than max_weight will be used in its attempted execution. If this is less than the maximum amount of weight that the message could take to be executed, then no execution attempt will be made.

forceDefaultXcmVersion(maybe_xcm_version: Option<u32>)​

  • interface: api.tx.xcmPallet.forceDefaultXcmVersion

  • summary: Set a safe XCM version (the version that XCM should be encoded with if the most recent version a destination can accept is unknown).

    • origin: Must be an origin specified by AdminOrigin.

    • maybe_xcm_version: The default XCM encoding version, or None to disable.

forceSubscribeVersionNotify(location: XcmVersionedLocation)​

  • interface: api.tx.xcmPallet.forceSubscribeVersionNotify

  • summary: Ask a location to notify us regarding their XCM version and any changes to it.

    • origin: Must be an origin specified by AdminOrigin.

    • location: The location to which we should subscribe for XCM version notifications.

forceSuspension(suspended: bool)​

  • interface: api.tx.xcmPallet.forceSuspension

  • summary: Set or unset the global suspension state of the XCM executor.

    • origin: Must be an origin specified by AdminOrigin.

    • suspended: true to suspend, false to resume.

forceUnsubscribeVersionNotify(location: XcmVersionedLocation)​

  • interface: api.tx.xcmPallet.forceUnsubscribeVersionNotify

  • summary: Require that a particular destination should no longer notify us regarding any XCM version changes.

    • origin: Must be an origin specified by AdminOrigin.

    • location: The location to which we are currently subscribed for XCM version notifications which we no longer desire.

forceXcmVersion(location: StagingXcmV4Location, version: u32)​

  • interface: api.tx.xcmPallet.forceXcmVersion

  • summary: Extoll that a particular destination can be communicated with through a particular version of XCM.

    • origin: Must be an origin specified by AdminOrigin.

    • location: The destination that is being described.

    • xcm_version: The latest version of XCM that location supports.

limitedReserveTransferAssets(dest: XcmVersionedLocation, beneficiary: XcmVersionedLocation, assets: XcmVersionedAssets, fee_asset_item: u32, weight_limit: XcmV3WeightLimit)​

  • interface: api.tx.xcmPallet.limitedReserveTransferAssets

  • summary: Transfer some assets from the local chain to the destination chain through their local, destination or remote reserve.

    assets must have same reserve location and may not be teleportable to dest.

    • assets have local reserve: transfer assets to sovereign account of destination chain and forward a notification XCM to dest to mint and deposit reserve-based assets to beneficiary.

    • assets have destination reserve: burn local assets and forward a notification to dest chain to withdraw the reserve assets from this chain's sovereign account and deposit them to beneficiary.

    • assets have remote reserve: burn local assets, forward XCM to reserve chain to move reserves from this chain's SA to dest chain's SA, and forward another XCM to dest to mint and deposit reserve-based assets to beneficiary.

      Fee payment on the destination side is made from the asset in the assets vector of index fee_asset_item, up to enough to pay for weight_limit of weight. If more weight is needed than weight_limit, then the operation will fail and the sent assets may be at risk.

    • origin: Must be capable of withdrawing the assets and executing XCM.

    • dest: Destination context for the assets. Will typically be [Parent, Parachain(..)] to send from parachain to parachain, or [Parachain(..)] to send from relay to parachain.

    • beneficiary: A beneficiary location for the assets in the context of dest. Will generally be an AccountId32 value.

    • assets: The assets to be withdrawn. This should include the assets used to pay the fee on the dest (and possibly reserve) chains.

    • fee_asset_item: The index into assets of the item which should be used to pay fees.

    • weight_limit: The remote-side weight limit, if any, for the XCM fee purchase.

limitedTeleportAssets(dest: XcmVersionedLocation, beneficiary: XcmVersionedLocation, assets: XcmVersionedAssets, fee_asset_item: u32, weight_limit: XcmV3WeightLimit)​

  • interface: api.tx.xcmPallet.limitedTeleportAssets

  • summary: Teleport some assets from the local chain to some destination chain.

    Fee payment on the destination side is made from the asset in the assets vector of index fee_asset_item, up to enough to pay for weight_limit of weight. If more weight is needed than weight_limit, then the operation will fail and the sent assets may be at risk.

    • origin: Must be capable of withdrawing the assets and executing XCM.

    • dest: Destination context for the assets. Will typically be [Parent, Parachain(..)] to send from parachain to parachain, or [Parachain(..)] to send from relay to parachain.

    • beneficiary: A beneficiary location for the assets in the context of dest. Will generally be an AccountId32 value.

    • assets: The assets to be withdrawn. This should include the assets used to pay the fee on the dest chain.

    • fee_asset_item: The index into assets of the item which should be used to pay fees.

    • weight_limit: The remote-side weight limit, if any, for the XCM fee purchase.

reserveTransferAssets(dest: XcmVersionedLocation, beneficiary: XcmVersionedLocation, assets: XcmVersionedAssets, fee_asset_item: u32)​

  • interface: api.tx.xcmPallet.reserveTransferAssets

  • summary: Transfer some assets from the local chain to the destination chain through their local, destination or remote reserve.

    assets must have same reserve location and may not be teleportable to dest.

    • assets have local reserve: transfer assets to sovereign account of destination chain and forward a notification XCM to dest to mint and deposit reserve-based assets to beneficiary.

    • assets have destination reserve: burn local assets and forward a notification to dest chain to withdraw the reserve assets from this chain's sovereign account and deposit them to beneficiary.

    • assets have remote reserve: burn local assets, forward XCM to reserve chain to move reserves from this chain's SA to dest chain's SA, and forward another XCM to dest to mint and deposit reserve-based assets to beneficiary.

      This function is deprecated: Use limited_reserve_transfer_assets instead.

      Fee payment on the destination side is made from the asset in the assets vector of index fee_asset_item. The weight limit for fees is not provided and thus is unlimited, with all fees taken as needed from the asset.

    • origin: Must be capable of withdrawing the assets and executing XCM.

    • dest: Destination context for the assets. Will typically be [Parent, Parachain(..)] to send from parachain to parachain, or [Parachain(..)] to send from relay to parachain.

    • beneficiary: A beneficiary location for the assets in the context of dest. Will generally be an AccountId32 value.

    • assets: The assets to be withdrawn. This should include the assets used to pay the fee on the dest (and possibly reserve) chains.

    • fee_asset_item: The index into assets of the item which should be used to pay fees.

send(dest: XcmVersionedLocation, message: XcmVersionedXcm)​

  • interface: api.tx.xcmPallet.send

teleportAssets(dest: XcmVersionedLocation, beneficiary: XcmVersionedLocation, assets: XcmVersionedAssets, fee_asset_item: u32)​

  • interface: api.tx.xcmPallet.teleportAssets

  • summary: Teleport some assets from the local chain to some destination chain.

    This function is deprecated: Use limited_teleport_assets instead.

    Fee payment on the destination side is made from the asset in the assets vector of index fee_asset_item. The weight limit for fees is not provided and thus is unlimited, with all fees taken as needed from the asset.

    • origin: Must be capable of withdrawing the assets and executing XCM.

    • dest: Destination context for the assets. Will typically be [Parent, Parachain(..)] to send from parachain to parachain, or [Parachain(..)] to send from relay to parachain.

    • beneficiary: A beneficiary location for the assets in the context of dest. Will generally be an AccountId32 value.

    • assets: The assets to be withdrawn. This should include the assets used to pay the fee on the dest chain.

    • fee_asset_item: The index into assets of the item which should be used to pay fees.

transferAssets(dest: XcmVersionedLocation, beneficiary: XcmVersionedLocation, assets: XcmVersionedAssets, fee_asset_item: u32, weight_limit: XcmV3WeightLimit)​

  • interface: api.tx.xcmPallet.transferAssets

  • summary: Transfer some assets from the local chain to the destination chain through their local, destination or remote reserve, or through teleports.

    Fee payment on the destination side is made from the asset in the assets vector of index fee_asset_item (hence referred to as fees), up to enough to pay for weight_limit of weight. If more weight is needed than weight_limit, then the operation will fail and the sent assets may be at risk.

    assets (excluding fees) must have same reserve location or otherwise be teleportable to dest, no limitations imposed on fees.

    • for local reserve: transfer assets to sovereign account of destination chain and forward a notification XCM to dest to mint and deposit reserve-based assets to beneficiary.

    • for destination reserve: burn local assets and forward a notification to dest chain to withdraw the reserve assets from this chain's sovereign account and deposit them to beneficiary.

    • for remote reserve: burn local assets, forward XCM to reserve chain to move reserves from this chain's SA to dest chain's SA, and forward another XCM to dest to mint and deposit reserve-based assets to beneficiary.

    • for teleports: burn local assets and forward XCM to dest chain to mint/teleport assets and deposit them to beneficiary.

    • origin: Must be capable of withdrawing the assets and executing XCM.

    • dest: Destination context for the assets. Will typically be X2(Parent, Parachain(..)) to send from parachain to parachain, or X1(Parachain(..)) to send from relay to parachain.

    • beneficiary: A beneficiary location for the assets in the context of dest. Will generally be an AccountId32 value.

    • assets: The assets to be withdrawn. This should include the assets used to pay the fee on the dest (and possibly reserve) chains.

    • fee_asset_item: The index into assets of the item which should be used to pay fees.

    • weight_limit: The remote-side weight limit, if any, for the XCM fee purchase.

transferAssetsUsingTypeAndThen(dest: XcmVersionedLocation, assets: XcmVersionedAssets, assets_transfer_type: StagingXcmExecutorAssetTransferTransferType, remote_fees_id: XcmVersionedAssetId, fees_transfer_type: StagingXcmExecutorAssetTransferTransferType, custom_xcm_on_dest: XcmVersionedXcm, weight_limit: XcmV3WeightLimit)​

  • interface: api.tx.xcmPallet.transferAssetsUsingTypeAndThen

  • summary: Transfer assets from the local chain to the destination chain using explicit transfer types for assets and fees.

    assets must have same reserve location or may be teleportable to dest. Caller must provide the assets_transfer_type to be used for assets:

    • TransferType::LocalReserve: transfer assets to sovereign account of destination chain and forward a notification XCM to dest to mint and deposit reserve-based assets to beneficiary.

    • TransferType::DestinationReserve: burn local assets and forward a notification to dest chain to withdraw the reserve assets from this chain's sovereign account and deposit them to beneficiary.

    • TransferType::RemoteReserve(reserve): burn local assets, forward XCM to reserve chain to move reserves from this chain's SA to dest chain's SA, and forward another XCM to dest to mint and deposit reserve-based assets to beneficiary. Typically the remote reserve is Asset Hub.

    • TransferType::Teleport: burn local assets and forward XCM to dest chain to mint/teleport assets and deposit them to beneficiary.

      On the destination chain, as well as any intermediary hops, BuyExecution is used to buy execution using transferred assets identified by remote_fees_id. Make sure enough of the specified remote_fees_id asset is included in the given list of assets. remote_fees_id should be enough to pay for weight_limit. If more weight is needed than weight_limit, then the operation will fail and the sent assets may be at risk.

      remote_fees_id may use different transfer type than rest of assets and can be specified through fees_transfer_type.

      The caller needs to specify what should happen to the transferred assets once they reach the dest chain. This is done through the custom_xcm_on_dest parameter, which contains the instructions to execute on dest as a final step. This is usually as simple as: Xcm(vec![DepositAsset { assets: Wild(AllCounted(assets.len())), beneficiary }]), but could be something more exotic like sending the assets even further.

    • origin: Must be capable of withdrawing the assets and executing XCM.

    • dest: Destination context for the assets. Will typically be [Parent, Parachain(..)] to send from parachain to parachain, or [Parachain(..)] to send from relay to parachain, or (parents: 2, (GlobalConsensus(..), ..)) to send from parachain across a bridge to another ecosystem destination.

    • assets: The assets to be withdrawn. This should include the assets used to pay the fee on the dest (and possibly reserve) chains.

    • assets_transfer_type: The XCM TransferType used to transfer the assets.

    • remote_fees_id: One of the included assets to be used to pay fees.

    • fees_transfer_type: The XCM TransferType used to transfer the fees assets.

    • custom_xcm_on_dest: The XCM to be executed on dest chain as the last step of the transfer, which also determines what happens to the assets on the destination chain.

    • weight_limit: The remote-side weight limit, if any, for the XCM fee purchase.